[asterisk-users] TE410P hardware problems

[Dave George]

dmesg:

wct4xxp 0000:0a:03.0: SPAN 9: Primary Sync Source
wct4xxp 0000:0a:03.0: Span 2 configured for ESF/B8ZS
wct4xxp 0000:0a:03.0: SPAN 10: Primary Sync Source
wct4xxp 0000:0a:03.0: All spans in alarm : No validspan to source RCLK from
wct4xxp 0000:0a:03.0: RCLK source set to span 1
wct4xxp 0000:0a:03.0: Span 3 configured for ESF/B8ZS
wct4xxp 0000:0a:03.0: SPAN 11: Primary Sync Source
wct4xxp 0000:0a:03.0: Span 4 configured for ESF/B8ZS
wct4xxp 0000:0a:03.0: SPAN 12: Primary Sync Source
wct4xxp 0000:0a:03.0: All spans in alarm : No validspan to source RCLK from
wct4xxp 0000:0a:03.0: RCLK source set to span 1



system.conf
span=1,1,0,esf,b8zs
bchan=2-24
mtp2=1

span=2,1,0,esf,b8zs
bchan=26-48
mtp2=25

span=3,1,0,esf,b8zs
bchan=49-72

span=4,1,0,esf,b8zs
bchan=73-96

span=5,1,0,esf,b8zs
bchan=97-120

span=6,1,0,esf,b8zs
bchan=121-144

span=7,1,0,esf,b8zs
bchan=145-168

span=8,1,0,esf,b8zs
bchan=169-192

span=9,1,0,esf,b8zs
bchan=193-216

span=10,1,0,esf,b8zs
bchan=217-240

span=11,1,0,esf,b8zs
bchan=241-264

span=12,1,0,esf,b8zs
bchan=265-288

Dave


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Shaun Ruffell
Sent: Tuesday, August 02, 2011 10:34 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] TE410P hardware problems

On Tue, Aug 02, 2011 at 09:22:46PM -0400, Dave George wrote:
> TE410P card down.
> 
> I have three (3) TE410P in one machine running asterisk with SS7.
> 
> My problems started last week when one of my cards started switching 
> to E1 every time after reboot.  I set the following in dahdi.conf and 
> that solve the problem.
> 
> /etc/modprobe.d/
> options wct4xxp t1e1override=0x00
> 
> Now all 4 ports on that card is down with Red Alarm.  I tried 
> rebooting the machine and restarting dahdi with no luck.  The other 
> two cards are working fine.  I put a loop plug the ports and same problem.

Any strange output in dmesg? Best guess is either the card has failed or it
has started to unseat from it's PCI slot. Normally when it starts to unseat
you'll see "Version Synchronization Errors" in dmesg when trying to load the
card.

--
Shaun Ruffell
Digium, Inc. | Linux Kernel Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at:
www.digium.com & www.asterisk.org

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to
Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users