[asterisk-users] TE410P hardware problems

[Eric Wieling]

If it doesn't go green when you put a hard loopback on the port, then contact Digium support.

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Dave George
> Sent: Tuesday, August 02, 2011 10:52 PM
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: Re: [asterisk-users] TE410P hardware problems
> 
> dmesg:
> 
> wct4xxp 0000:0a:03.0: SPAN 9: Primary Sync Source
> wct4xxp 0000:0a:03.0: Span 2 configured for ESF/B8ZS
> wct4xxp 0000:0a:03.0: SPAN 10: Primary Sync Source
> wct4xxp 0000:0a:03.0: All spans in alarm : No validspan to source RCLK from
> wct4xxp 0000:0a:03.0: RCLK source set to span 1
> wct4xxp 0000:0a:03.0: Span 3 configured for ESF/B8ZS
> wct4xxp 0000:0a:03.0: SPAN 11: Primary Sync Source
> wct4xxp 0000:0a:03.0: Span 4 configured for ESF/B8ZS
> wct4xxp 0000:0a:03.0: SPAN 12: Primary Sync Source
> wct4xxp 0000:0a:03.0: All spans in alarm : No validspan to source RCLK from
> wct4xxp 0000:0a:03.0: RCLK source set to span 1