[asterisk-users] TE410P hardware problems

[Dave George]

Hi,

We opened the server an checked that the cards were seated correctly and
they are.  I will have the tech completely remove them tomorrow and try
again.  I will post the results.

Dave


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Shaun Ruffell
Sent: Tuesday, August 02, 2011 10:34 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] TE410P hardware problems

On Tue, Aug 02, 2011 at 09:22:46PM -0400, Dave George wrote:
> TE410P card down.
> 
> I have three (3) TE410P in one machine running asterisk with SS7.
> 
> My problems started last week when one of my cards started switching 
> to E1 every time after reboot.  I set the following in dahdi.conf and 
> that solve the problem.
> 
> /etc/modprobe.d/
> options wct4xxp t1e1override=0x00
> 
> Now all 4 ports on that card is down with Red Alarm.  I tried 
> rebooting the machine and restarting dahdi with no luck.  The other 
> two cards are working fine.  I put a loop plug the ports and same problem.

Any strange output in dmesg? Best guess is either the card has failed or it
has started to unseat from it's PCI slot. Normally when it starts to unseat
you'll see "Version Synchronization Errors" in dmesg when trying to load the
card.

--
Shaun Ruffell
Digium, Inc. | Linux Kernel Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at:
www.digium.com & www.asterisk.org

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to
Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users