[asterisk-users] Dialplan Priorities and Sort Order...

[Jeff LaCoursiere]

On Tue, 19 May 2009, Tim Nelson wrote:

> Not all 18xx are to go out the analog lines on g1. Only, 1866 and 1800. 
>
> The second part makes sense. Now do the two groups below continue to go 
> into their own contexts and one included by the other or should they 
> both go into the same context?

You would not need multiple contexts unless you want to exclude some 
phones from using one of the sets of lines.

Cheers,

j

>
> --Tim
>
> ----- "Martin" <asterisklist at callthem.info> wrote:
>> ok, if 18xx are to go through analog lines and the rest through PRI
>> then it's simply
>> 
>> exten => _18XXNXXXXXX,1,Dial(zap/g1/${EXTEN})
>> exten => _18XXNXXXXXX,n,Hangup
>> 
>> exten => _1[2-79]XXNXXXXXX,1,Dial(zap/g0/${EXTEN})
>> exten => _1[2-79]XXNXXXXXX,n,Hangup()
>> 
>> Martin
>> 
>> On Tue, May 19, 2009 at 11:00 AM, Danny Nicholas <danny at debsinc.com>
>> wrote:
>> > The first _1866 line should start a new segment of the dialplan.
>>  The way
>> > this should work is 1800 and 1866 go out on zap /g1; anything else
>> falls
>> > into zap/g0.
>> >
>> > -----Original Message-----
>> > From: asterisk-users-bounces at lists.digium.com
>> > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tim
>> Nelson
>> > Sent: Tuesday, May 19, 2009 10:38 AM
>> > To: Asterisk Users Mailing List - Non-Commercial Discussion
>> > Subject: [asterisk-users] Dialplan Priorities and Sort Order...
>> >
>> > Greetings!
>> >
>> > I'm hoping someone can help me with what should be the most basic
>> of
>> > problems. Essentially, I want to have certain calls on an Asterisk
>> 1.2.25
>> > (Yes I know its old, upgrade, etc... its on my roadmap) install go
>> out a
>> > couple of analog lines and all other calls go out a PRI. The analog
>> lines
>> > are setup in Zaptel group 1 and the PRI channels are in Zaptel group
>> 0. Here
>> > is my relevant config:
>> >
>> > ; Outbound via POTS
>> > [general-outbound]
>> > exten => _1800NXXXXXX,1,Dial(ZAP/g1/${EXTEN})
>> > exten => _1800NXXXXXX,n,Answer
>> > exten => _1800NXXXXXX,n,Busy
>> > exten => _1800NXXXXXX,n,Hangup
>> > exten => _1866NXXXXXX,n,Dial(ZAP/g1/${EXTEN})
>> > exten => _1866NXXXXXX,n,Answer
>> > exten => _1866NXXXXXX,n,Busy
>> > exten => _1866NXXXXXX,n,Hangup
>> > include => pri_outbound
>> >
>> > ; Outbound via PRI
>> > [pri_outbound]
>> > exten => _X.,101,Dial(ZAP/g0/${EXTEN})
>> > exten => _X.,102,Answer
>> > exten => _X.,103,Busy
>> > exten => _X.,104,Hangup
>> >
>> > I certainly cannot be the only one who wants this sort of setup...
>> correct?
>> > Is it the way I'm including the other context, the dial patterns,
>> the
>> > priorities, etc? I'm not opposed to combining it into a single
>> context, I
>> > just started it out with this way. All hints are appreciated. (Pun
>> > intended.. :-) )
>> >
>> > --Tim
>> >
>> > _______________________________________________
>> > -- Bandwidth and Colocation Provided by http://www.api-digital.com
>> --
>> >
>> > asterisk-users mailing list
>> > To UNSUBSCRIBE or update options visit:
>> >   http://lists.digium.com/mailman/listinfo/asterisk-users
>> >
>> >
>> > _______________________________________________
>> > -- Bandwidth and Colocation Provided by http://www.api-digital.com
>> --
>> >
>> > asterisk-users mailing list
>> > To UNSUBSCRIBE or update options visit:
>> >   http://lists.digium.com/mailman/listinfo/asterisk-users
>> >
>> 
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> 
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users