[asterisk-users] Dialplan Priorities and Sort Order...

[Tim Nelson]

Not all 18xx are to go out the analog lines on g1. Only, 1866 and 1800. 

The second part makes sense. Now do the two groups below continue to go into their own contexts and one included by the other or should they both go into the same context?

--Tim

----- "Martin" <asterisklist at callthem.info> wrote:
> ok, if 18xx are to go through analog lines and the rest through PRI
> then it's simply
> 
> exten => _18XXNXXXXXX,1,Dial(zap/g1/${EXTEN})
> exten => _18XXNXXXXXX,n,Hangup
> 
> exten => _1[2-79]XXNXXXXXX,1,Dial(zap/g0/${EXTEN})
> exten => _1[2-79]XXNXXXXXX,n,Hangup()
> 
> Martin
> 
> On Tue, May 19, 2009 at 11:00 AM, Danny Nicholas <danny at debsinc.com>
> wrote:
> > The first _1866 line should start a new segment of the dialplan.
>  The way
> > this should work is 1800 and 1866 go out on zap /g1; anything else
> falls
> > into zap/g0.
> >
> > -----Original Message-----
> > From: asterisk-users-bounces at lists.digium.com
> > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tim
> Nelson
> > Sent: Tuesday, May 19, 2009 10:38 AM
> > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > Subject: [asterisk-users] Dialplan Priorities and Sort Order...
> >
> > Greetings!
> >
> > I'm hoping someone can help me with what should be the most basic
> of
> > problems. Essentially, I want to have certain calls on an Asterisk
> 1.2.25
> > (Yes I know its old, upgrade, etc... its on my roadmap) install go
> out a
> > couple of analog lines and all other calls go out a PRI. The analog
> lines
> > are setup in Zaptel group 1 and the PRI channels are in Zaptel group
> 0. Here
> > is my relevant config:
> >
> > ; Outbound via POTS
> > [general-outbound]
> > exten => _1800NXXXXXX,1,Dial(ZAP/g1/${EXTEN})
> > exten => _1800NXXXXXX,n,Answer
> > exten => _1800NXXXXXX,n,Busy
> > exten => _1800NXXXXXX,n,Hangup
> > exten => _1866NXXXXXX,n,Dial(ZAP/g1/${EXTEN})
> > exten => _1866NXXXXXX,n,Answer
> > exten => _1866NXXXXXX,n,Busy
> > exten => _1866NXXXXXX,n,Hangup
> > include => pri_outbound
> >
> > ; Outbound via PRI
> > [pri_outbound]
> > exten => _X.,101,Dial(ZAP/g0/${EXTEN})
> > exten => _X.,102,Answer
> > exten => _X.,103,Busy
> > exten => _X.,104,Hangup
> >
> > I certainly cannot be the only one who wants this sort of setup...
> correct?
> > Is it the way I'm including the other context, the dial patterns,
> the
> > priorities, etc? I'm not opposed to combining it into a single
> context, I
> > just started it out with this way. All hints are appreciated. (Pun
> > intended.. :-) )
> >
> > --Tim
> >
> > _______________________________________________
> > -- Bandwidth and Colocation Provided by http://www.api-digital.com
> --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> > _______________________________________________
> > -- Bandwidth and Colocation Provided by http://www.api-digital.com
> --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users