[asterisk-r2] Timer Question?

[Moises Silva]

>
> I got a Nortel PBX connected to asterisk using E1 with mfcr2.
> Asterisk has the telco E1 plugged in.
>
> Some Nortel users are complaining about outbound dialing (through
> asterisk) taking like 5 to 6 seconds before the call start.
>
> I tried with other customer who has exactly the same scenario, but
> with libunicall instead of openr2, and I noticed, when I changed the
> t3 value... that time got decreased or increased, depending on the
> amount of time I specified. So, I'm sure whenever I change the t3
> value, I'm getting the expected result.
>

Then you will have to test openr2 in the customer box. The timer I mentioned
does exactly that.
There is something different in your test scenario.

-- 
Moises Silva
Software Developer
Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3
Canada
t. 1 905 474 1990 x 128 | e. moy at sangoma.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20090714/2a654ed4/attachment.htm