[asterisk-r2] Timer Question?

[Juan Carlos Huerta]

What version is your Nortel PBX? I remember a big headache trying to make
Asterisk 1.4 work with a Nortel Option 11 and MFC/R2, as I remember Moises
and I made a special R2 variant for that, do you remember Moy?

Juan Carlos
~ Lo que no te mata te fortalece ~


On Tue, Jul 14, 2009 at 2:03 PM, Moises Silva <moises.silva at gmail.com>wrote:

> I got a Nortel PBX connected to asterisk using E1 with mfcr2.
>> Asterisk has the telco E1 plugged in.
>>
>> Some Nortel users are complaining about outbound dialing (through
>> asterisk) taking like 5 to 6 seconds before the call start.
>>
>> I tried with other customer who has exactly the same scenario, but
>> with libunicall instead of openr2, and I noticed, when I changed the
>> t3 value... that time got decreased or increased, depending on the
>> amount of time I specified. So, I'm sure whenever I change the t3
>> value, I'm getting the expected result.
>>
>
> Then you will have to test openr2 in the customer box. The timer I
> mentioned does exactly that.
> There is something different in your test scenario.
>
> --
> Moises Silva
> Software Developer
> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R
> 9T3 Canada
> t. 1 905 474 1990 x 128 | e. moy at sangoma.com
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20090714/ea708716/attachment-0001.htm