[asterisk-r2] Timer Question?

[Arturo Ochoa]

On Tue, Jul 14, 2009 at 12:12 PM, Moises Silva<moises.silva at gmail.com> wrote:
>>
>> Ohh Thank you Moy... actually mfcr2_mfback_timeout was the first one I
>> tried... but in my test environment didn't work... but I'll change
>> that on the production one... let's see if there's some difference...
>
> How did you test? what are the results you expected?
>
> --
> Moises Silva
> Software Developer
> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3
> Canada
> t. 1 905 474 1990 x 128 | e. moy at sangoma.com
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>

I got a Nortel PBX connected to asterisk using E1 with mfcr2.
Asterisk has the telco E1 plugged in.

Some Nortel users are complaining about outbound dialing (through
asterisk) taking like 5 to 6 seconds before the call start.

I tried with other customer who has exactly the same scenario, but
with libunicall instead of openr2, and I noticed, when I changed the
t3 value... that time got decreased or increased, depending on the
amount of time I specified. So, I'm sure whenever I change the t3
value, I'm getting the expected result.