<div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">I got a Nortel PBX connected to asterisk using E1 with mfcr2.<br>
Asterisk has the telco E1 plugged in.<br>
<br>
Some Nortel users are complaining about outbound dialing (through<br>
asterisk) taking like 5 to 6 seconds before the call start.<br>
<br>
I tried with other customer who has exactly the same scenario, but<br>
with libunicall instead of openr2, and I noticed, when I changed the<br>
t3 value... that time got decreased or increased, depending on the<br>
amount of time I specified. So, I'm sure whenever I change the t3<br>
value, I'm getting the expected result.<br></blockquote></div><div><br></div><div>Then you will have to test openr2 in the customer box. The timer I mentioned does exactly that.</div><div>There is something different in your test scenario.</div>
<br>-- <br>Moises Silva<br>Software Developer<br>Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada<br>t. 1 905 474 1990 x 128 | e. <a href="mailto:moy@sangoma.com">moy@sangoma.com</a><br>