[test-results] [Bamboo] Asterisk - 1.8 > Ubuntu Lucid (10.04) > #659 has FAILED (1 tests failed). Change made by rmudgett.

[Bamboo]

-----------------------------------------------------------------------
Asterisk - 1.8 > Ubuntu Lucid (10.04) > #659 failed.
-----------------------------------------------------------------------
Code has been updated by rmudgett.
1/109 tests failed.

http://bamboo.asterisk.org/browse/AST18-LUCID-659/


--------------
Failing Jobs
--------------
  - amd64 (Default Stage): 1 of 109 tests failed.


--------------
Code Changes
--------------
rmudgett (332264):

>Outgoing BRI calls fail when using Asterisk 1.8 with HA8, HB8, and B410P cards.
>
>France Telecom brings layer 2 and layer 1 down on BRI lines when the line
>is idle.  When layer 1 goes down Asterisk cannot make outgoing calls and
>the HA8 and HB8 cards also get IRQ misses.
>
>The inability to make outgoing calls is because the line is in red alarm
>and Asterisk will not make calls over a line it considers unavailable.
>The IRQ misses for the HA8 and HB8 card are because the hardware is
>switching clock sources from the line which just brought layer 1 down to
>internal timing.
>
>There is a DAHDI option for the B410P card to not tell Asterisk that layer
>1 went down so Asterisk will allow outgoing calls: "modprobe wcb4xxp
>teignored=1".  There is a similar DAHDI option for the HA8 and HB8 cards:
>"modprobe wctdm24xxp bri_teignored=1".  Unfortunately that will not clear
>up the IRQ misses when the telco brings layer 1 down.
>
>* Add layer 2 persistence option to customize the layer 2 behavior on BRI
>PTMP lines.  The new option has three settings: 1) Use libpri default
>layer 2 setting.  2) Keep layer 2 up.  Bring layer 2 back up when the peer
>brings it down.  3) Leave layer 2 down when the peer brings it down.
>Layer 2 will be brought up as needed for outgoing calls.
>
>JIRA AST-598
>


--------------
Tests
--------------
New Test Failures (1)
   - AsteriskTestSuite: S/fastagi/control-stream-file

--
This message is automatically generated by Atlassian Bamboo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/test-results/attachments/20110817/747dcacf/attachment-0001.htm>