[test-results] [Bamboo] Asterisk - Trunk > Mac OS X Snow Leopard (10.6) > #325 has FAILED. Change made by rmudgett.

[Bamboo]

-----------------------------------------------------------------------
Asterisk - Trunk > Mac OS X Snow Leopard (10.6) > #325 failed.
-----------------------------------------------------------------------
This build occurred because it is a dependant of ASTTRUNK-LUCID-852.
No failed tests found, a possible compilation error.

http://bamboo.asterisk.org/browse/ASTTRUNK-SNOWLEOPARD-325/


--------------
Failing Jobs
--------------
  - x86_64 (Default Stage): No tests found.


--------------
Code Changes
--------------
rmudgett (332270):

>Merged revisions 332265 via svnmerge from 
>https://origsvn.digium.com/svn/asterisk/branches/10
>
>................
>  r332265 | rmudgett | 2011-08-17 11:01:29 -0500 (Wed, 17 Aug 2011) | 33 lines
>  
>  Merged revisions 332264 via svnmerge from 
>  https://origsvn.digium.com/svn/asterisk/branches/1.8
>  
>  ........
>    r332264 | rmudgett | 2011-08-17 10:51:08 -0500 (Wed, 17 Aug 2011) | 26 lines
>    
>    Outgoing BRI calls fail when using Asterisk 1.8 with HA8, HB8, and B410P cards.
>    
>    France Telecom brings layer 2 and layer 1 down on BRI lines when the line
>    is idle.  When layer 1 goes down Asterisk cannot make outgoing calls and
>    the HA8 and HB8 cards also get IRQ misses.
>    
>    The inability to make outgoing calls is because the line is in red alarm
>    and Asterisk will not make calls over a line it considers unavailable.
>    The IRQ misses for the HA8 and HB8 card are because the hardware is
>    switching clock sources from the line which just brought layer 1 down to
>    internal timing.
>    
>    There is a DAHDI option for the B410P card to not tell Asterisk that layer
>    1 went down so Asterisk will allow outgoing calls: "modprobe wcb4xxp
>    teignored=1".  There is a similar DAHDI option for the HA8 and HB8 cards:
>    "modprobe wctdm24xxp bri_teignored=1".  Unfortunately that will not clear
>    up the IRQ misses when the telco brings layer 1 down.
>    
>    * Add layer 2 persistence option to customize the layer 2 behavior on BRI
>    PTMP lines.  The new option has three settings: 1) Use libpri default
>    layer 2 setting.  2) Keep layer 2 up.  Bring layer 2 back up when the peer
>    brings it down.  3) Leave layer 2 down when the peer brings it down.
>    Layer 2 will be brought up as needed for outgoing calls.
>    
>    JIRA AST-598
>  ........
>................
>


--
This message is automatically generated by Atlassian Bamboo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/test-results/attachments/20110817/7211d6dd/attachment.htm>