[asterisk-users] Asterisk 1.6.2.18, Cisco 79XX not registering

[Cassius Smith]

> Did this fix make it into 1.8.4? Getting registration errors on Cisco 79XX in
> 1.8.4, going back to 1.8.3.3 everything works. I did open
> https://issues.asterisk.org/view.php?id=19264 and included a SIP trace.

Sorry all, I did not follow up adequately. Definitely a problem with
1.6.2.18 and the issue # is 18951.

Fixed in 1.8.3.3; Cisco 79xx registered fine.

I don't know about 1.8.4 yet; haven't installed it for testing yet.

Cassius
> 
> 
> 
> On Fri, May 6, 2011 at 12:24 PM, Julian Lyndon-Smith <asterisk at dotr.com>
> wrote:
>> It was my problem ;)
>> 
>> https://issues.asterisk.org/view.php?id=18951
>> 
>> fixed in svn
>> 
>> On 6 May 2011 16:45, Steve Davies <davies147 at gmail.com> wrote:
>>> > On 6 May 2011 16:30, Eric Wieling <EWieling at nyigc.com> wrote:
>>>>> >>> -----Original Message-----
>>>>> >>> From: asterisk-users-bounces at lists.digium.com
>>>>> >>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
>>>>> >>> Cassius Smith
>>>>> >>> Sent: Friday, May 06, 2011 11:23 AM
>>>>> >>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>>>>> >>> Subject: [asterisk-users] Asterisk 1.6.2.18, Cisco 79XX not
>>>>> >>> registering
>>>>> >>>
>>>>> >>> Hi all,
>>>>> >>> I have a production server running with about 90 Cisco
>>>>> >>> 79[46]1's and SIP release 8.5(2)SR1 from last year. I was
>>>>> >>> running Asterisk 1.6.2.9 and upgraded last night after hours.
>>>>> >>> (Seemed low risk to me!)
>>>>> >>>
>>>>> >>> Much to my surprise, not a single one of the Cisco 79XX
>>>>> >>> phones would register. Since it's a production server, I
>>>>> >>> rolled back to 1.6.2.9 and everything was fine. All my
>>>>> >>> Linksys SPA phones and Polycom speaker phones registered just fine.
>>>>> >>>
>>>>> >>> I am now setting up  test servers with both 1.6.2.18 and
>>>>> >>> 1.8.3.3 to collect some debug.
>>>>> >>>
>>>>> >>> I am just curious - has anyone else had SIP issues with these
>>>>> >>> phones and updating Asterisk broke them?
>>>>> >>>
>>>>> >>> I will post results of my findings after I have time to collect them.
>>>>> >>>
>>>>> >>> Cassius Smitha
>>>>> >>>
>>>> >>
>>>> >> I seem to recall this issue mentioned on asterisk-dev.  Check
>>>> issues.digium.com <http://issues.digium.com>  and see if there is anything
>>>> similar to your issue.
>>>> >>
>>> >
>>> > I also remember this being mentioned - I believe it was fixed in the
>>> > chan_sip Via: header handling code. The fix is in branches/1.6.2
>>> > already, so you should be able to grab the patch without too much
>>> > trouble.
>>> >
>>> > Regards,
>>> > Steve
> 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110510/34501f3a/attachment.htm>