[asterisk-users] Asterisk 1.6.2.18, Cisco 79XX not registering

[Cassius Smith]

> 
>> Did this fix make it into 1.8.4? Getting registration errors on Cisco 79XX in
>> 1.8.4, going back to 1.8.3.3 everything works. I did open
>> https://issues.asterisk.org/view.php?id=19264 and included a SIP trace.
> 
> Sorry all, I did not follow up adequately. Definitely a problem with 1.6.2.18
> and the issue # is 18951.
> 
> Fixed in 1.8.3.3; Cisco 79xx registered fine.
> 
> I don't know about 1.8.4 yet; haven't installed it for testing yet.
> 
> Cassius

This fix definitely not in 1.8.4; I also dropped back to 1.8.3.3 on a test
box and Cisco 79XX's register correctly. Thanks for opening the issue; will
check 1.8.5rc when it's available.

Cassius 
>> 
>> 
>> 
>> On Fri, May 6, 2011 at 12:24 PM, Julian Lyndon-Smith <asterisk at dotr.com>
>> wrote:
>>> It was my problem ;)
>>> 
>>> https://issues.asterisk.org/view.php?id=18951
>>> 
>>> fixed in svn
>>> 
>>> On 6 May 2011 16:45, Steve Davies <davies147 at gmail.com> wrote:
>>>> > On 6 May 2011 16:30, Eric Wieling <EWieling at nyigc.com> wrote:
>>>>>> >>> -----Original Message-----
>>>>>> >>> From: asterisk-users-bounces at lists.digium.com
>>>>>> >>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
>>>>>> >>> Cassius Smith
>>>>>> >>> Sent: Friday, May 06, 2011 11:23 AM
>>>>>> >>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>>>>>> >>> Subject: [asterisk-users] Asterisk 1.6.2.18, Cisco 79XX not
>>>>>> >>> registering
>>>>>> >>>
>>>>>> >>> Hi all,
>>>>>> >>> I have a production server running with about 90 Cisco
>>>>>> >>> 79[46]1's and SIP release 8.5(2)SR1 from last year. I was
>>>>>> >>> running Asterisk 1.6.2.9 and upgraded last night after hours.
>>>>>> >>> (Seemed low risk to me!)
>>>>>> >>>
>>>>>> >>> Much to my surprise, not a single one of the Cisco 79XX
>>>>>> >>> phones would register. Since it's a production server, I
>>>>>> >>> rolled back to 1.6.2.9 and everything was fine. All my
>>>>>> >>> Linksys SPA phones and Polycom speaker phones registered just fine.
>>>>>> >>>
>>>>>> >>> I am now setting up  test servers with both 1.6.2.18 and
>>>>>> >>> 1.8.3.3 to collect some debug.
>>>>>> >>>
>>>>>> >>> I am just curious - has anyone else had SIP issues with these
>>>>>> >>> phones and updating Asterisk broke them?
>>>>>> >>>
>>>>>> >>> I will post results of my findings after I have time to collect them.
>>>>>> >>>
>>>>>> >>> Cassius Smitha
>>>>>> >>>
>>>>> >>
>>>>> >> I seem to recall this issue mentioned on asterisk-dev.  Check
>>>>> issues.digium.com <http://issues.digium.com>  and see if there is anything
>>>>> similar to your issue.
>>>>> >>
>>>> >
>>>> > I also remember this being mentioned - I believe it was fixed in the
>>>> > chan_sip Via: header handling code. The fix is in branches/1.6.2
>>>> > already, so you should be able to grab the patch without too much
>>>> > trouble.
>>>> >
>>>> > Regards,
>>>> > Steve
>> 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110519/2acae280/attachment.htm>