[asterisk-users] Connecting Asterisk to Siemens Hipath 3750

[Danny Nicholas]

What does your Dial command look like?  If you are using the ,r option,
Asterisk will generate it’s own ringing noise even on a dead or busy line.

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Bobola Oke
Sent: Wednesday, March 30, 2011 11:36 AM
To: Josué Conti
Cc: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Connecting Asterisk to Siemens Hipath 3750

 

Hi guys

Thanks alot for the support.

 

I have successfully connected the HiPath3750 to the E1 lines and everything
is working fine with the appropriate dial plans. I used Josue's config and
the info I got from here http://www.voip-info.org/wiki/view/Siemens+Hicom

 

Well, not everything is working fine though.. The asterisk server seems to
'generate' the ringing tones as opposed to using the tones from the various
other external numbers that I am calling. For example, if I call a phone
number that is switched off, it rings for a while and then I get a service
unavailable message on the IP phones.  What can I do to get the normal "the
number you have dialed is switched off". I am in Nigeria if that information
is useful in this situation.

 

Thanks.

 

Bobola

 

2011/3/16 Bobola Oke <okebobola at gmail.com>

Hey Josue,

Thanks alot. I will be expecting the configuration samples. From your
response, I guess QSIG would be better for more functionality between the
two PBXs then..

Yes, this is my first implementation of asterisk and the support I have had
from the mailing lists (some just by searching the archives) has been
nothing short of wonderful. Thanks guys.

Hoping to hear from you soon.

Best regards,

Bobola O. Oke

 

2011/3/15 Josué Conti <josueconti at gmail.com>

Hello Bobola, thanks for your response.
So, I'm using Euroisdn with a Siemens HiPath 3750 and Qsig with Siemens
HiPath 4000.
Because we don't need to "facility enable" in this case (HiPath 3750) just
ANI interchange between user's, ok?
In another response I was send to you a configurations sample for Asterisk
and Siemens may you look this?
One more time, best regards and good luck in your project.
If you need please contact us.

Josue

 

2011/3/14 Bobola Oke <okebobola at gmail.com>

Thanks guys,

I got the layer1 link up.

Edwin, I will make a cable from this link that you have posted and see if
that also works. Presently, I just did a 'manual' connect of the ends to get
the layer1 up.

Josue, many thanks for your response. Searching through this list archives,
I see that you must have done alot of integrating asterisk with Siemens PBX.


Guys, what do you advise I use for the upper layer protocols, QSIG or
EuroISDN, to connect the asterisk PBX and the Siemens PBX? What are the pros
and cons of using either protocol. Working sample configuration files are
highly appreciated + what the PBX guy has to configure on the Siemens side. 

Thanks alot.





On Fri, Mar 11, 2011 at 1:17 AM, Edwin Lam <edwin.lam at officegeneral.com>
wrote:

On 3/10/11 6:43 AM, Bobola Oke wrote:


The telco has a DB9 terminated interface straight to the PBX and I cannot
make
sense out of the interface for the PBX. What kind of interface is this? How
do I
connect the RJ48 of the PRI cards to make this whole setting work.

 

searching through this list's archive and found this:
http://lists.digium.com/pipermail/asterisk-users/2006-December/174258.html


-- 
Edwin Lam <edwin.lam at officegeneral.com>
Systems Engineer, OfficeWyze, Inc.
Ph:  <tel:%2B1%20415%20439%204988>  <tel:%2B1%20415%20439%204988>
<tel:%2B1%20415%20439%204988> +1 415 439 4988 <tel:%2B1%20415%20439%204988>
Fax:  <tel:%2B1%20415%20283%203370>  <tel:%2B1%20415%20283%203370>
<tel:%2B1%20415%20283%203370> +1 415 283 3370 <tel:%2B1%20415%20283%203370> 
http://pgpkeys.mit.edu:11371/pks/lookup?op=get
<http://pgpkeys.mit.edu:11371/pks/lookup?op=get&search=0xD6506D20>
&search=0xD6506D20




--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
             http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
 http://lists.digium.com/mailman/listinfo/asterisk-users

 

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110330/7639cd9b/attachment.htm>