[asterisk-users] Connecting Asterisk to Siemens Hipath 3750

[Bobola Oke]

Hey Danny,

Yes, modifying the dial command fixed it.

Thanks alot.



Best regards,

Bobola O. Oke

On Wed, Mar 30, 2011 at 6:03 PM, Danny Nicholas <danny at debsinc.com> wrote:

>  What does your Dial command look like?  If you are using the ,r option,
> Asterisk will generate it’s own ringing noise even on a dead or busy line.
>
>
>  ------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *Bobola Oke
> *Sent:* Wednesday, March 30, 2011 11:36 AM
> *To:* Josué Conti
> *Cc:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] Connecting Asterisk to Siemens Hipath 3750
>
>
>
> Hi guys
>
> Thanks alot for the support.
>
>
>
> I have successfully connected the HiPath3750 to the E1 lines and everything
> is working fine with the appropriate dial plans. I used Josue's config and
> the info I got from here http://www.voip-info.org/wiki/view/Siemens+Hicom
>
>
>
> Well, not everything is working fine though.. The asterisk server seems to
> 'generate' the ringing tones as opposed to using the tones from the various
> other external numbers that I am calling. For example, if I call a phone
> number that is switched off, it rings for a while and then I get a service
> unavailable message on the IP phones.  What can I do to get the normal "the
> number you have dialed is switched off". I am in Nigeria if that information
> is useful in this situation.
>
>
>
> Thanks.
>
>
>
> Bobola
>
>
>
> 2011/3/16 Bobola Oke <okebobola at gmail.com>
>
> Hey Josue,
>
> Thanks alot. I will be expecting the configuration samples. From your
> response, I guess QSIG would be better for more functionality between the
> two PBXs then..
>
> Yes, this is my first implementation of asterisk and the support I have had
> from the mailing lists (some just by searching the archives) has been
> nothing short of wonderful. Thanks guys.
>
> Hoping to hear from you soon.
>
> Best regards,
>
> Bobola O. Oke
>
>
>
> 2011/3/15 Josué Conti <josueconti at gmail.com>
>
> Hello Bobola, thanks for your response.
> So, I'm using Euroisdn with a Siemens HiPath 3750 and Qsig with Siemens
> HiPath 4000.
> Because we don't need to "facility enable" in this case (HiPath 3750) just
> ANI interchange between user's, ok?
> In another response I was send to you a configurations sample for Asterisk
> and Siemens may you look this?
> One more time, best regards and good luck in your project.
> If you need please contact us.
>
> Josue
>
>
>
> 2011/3/14 Bobola Oke <okebobola at gmail.com>
>
> Thanks guys,
>
> I got the layer1 link up.
>
> Edwin, I will make a cable from this link that you have posted and see if
> that also works. Presently, I just did a 'manual' connect of the ends to get
> the layer1 up.
>
> Josue, many thanks for your response. Searching through this list archives,
> I see that you must have done alot of integrating asterisk with Siemens PBX.
>
>
> Guys, what do you advise I use for the upper layer protocols, QSIG or
> EuroISDN, to connect the asterisk PBX and the Siemens PBX? What are the pros
> and cons of using either protocol. Working sample configuration files are
> highly appreciated + what the PBX guy has to configure on the Siemens side.
>
> Thanks alot.
>
>
>
>  On Fri, Mar 11, 2011 at 1:17 AM, Edwin Lam <edwin.lam at officegeneral.com>
> wrote:
>
> On 3/10/11 6:43 AM, Bobola Oke wrote:
>
>
> The telco has a DB9 terminated interface straight to the PBX and I cannot
> make
> sense out of the interface for the PBX. What kind of interface is this? How
> do I
> connect the RJ48 of the PRI cards to make this whole setting work.
>
>
>
> searching through this list's archive and found this:
> http://lists.digium.com/pipermail/asterisk-users/2006-December/174258.html
>
>
> --
> Edwin Lam <edwin.lam at officegeneral.com>
> Systems Engineer, OfficeWyze, Inc.
> Ph: <%2B1%20415%20439%204988> <%2B1%20415%20439%204988><%2B1%20415%20439%204988>+1
> 415 439 4988 Fax: <%2B1%20415%20283%203370> <%2B1%20415%20283%203370><%2B1%20415%20283%203370>+1
> 415 283 3370
> http://pgpkeys.mit.edu:11371/pks/lookup?op=get&search=0xD6506D20
>
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>              http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>  http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
>
>
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110331/341d73bf/attachment-0001.htm>