[asterisk-users] Connecting Asterisk to Siemens Hipath 3750

[Bobola Oke]

Hi guys
Thanks alot for the support.

I have successfully connected the HiPath3750 to the E1 lines and everything
is working fine with the appropriate dial plans. I used Josue's config and
the info I got from here http://www.voip-info.org/wiki/view/Siemens+Hicom

Well, not everything is working fine though.. The asterisk server seems to
'generate' the ringing tones as opposed to using the tones from the various
other external numbers that I am calling. For example, if I call a phone
number that is switched off, it rings for a while and then I get a service
unavailable message on the IP phones.  What can I do to get the normal "the
number you have dialed is switched off". I am in Nigeria if that information
is useful in this situation.

Thanks.

Bobola

2011/3/16 Bobola Oke <okebobola at gmail.com>

> Hey Josue,
>
> Thanks alot. I will be expecting the configuration samples. From your
> response, I guess QSIG would be better for more functionality between the
> two PBXs then..
>
> Yes, this is my first implementation of asterisk and the support I have had
> from the mailing lists (some just by searching the archives) has been
> nothing short of wonderful. Thanks guys.
>
> Hoping to hear from you soon.
>
> Best regards,
>
> Bobola O. Oke
>
>
> 2011/3/15 Josué Conti <josueconti at gmail.com>
>
>> Hello Bobola, thanks for your response.
>> So, I'm using Euroisdn with a Siemens HiPath 3750 and Qsig with Siemens
>> HiPath 4000.
>> Because we don't need to "facility enable" in this case (HiPath 3750) just
>> ANI interchange between user's, ok?
>> In another response I was send to you a configurations sample for Asterisk
>> and Siemens may you look this?
>> One more time, best regards and good luck in your project.
>> If you need please contact us.
>>
>> Josue
>>
>>
>> 2011/3/14 Bobola Oke <okebobola at gmail.com>
>>
>>> Thanks guys,
>>>
>>> I got the layer1 link up.
>>>
>>> Edwin, I will make a cable from this link that you have posted and see if
>>> that also works. Presently, I just did a 'manual' connect of the ends to get
>>> the layer1 up.
>>>
>>> Josue, many thanks for your response. Searching through this list
>>> archives, I see that you must have done alot of integrating asterisk with
>>> Siemens PBX.
>>>
>>> Guys, what do you advise I use for the upper layer protocols, QSIG or
>>> EuroISDN, to connect the asterisk PBX and the Siemens PBX? What are the pros
>>> and cons of using either protocol. Working sample configuration files are
>>> highly appreciated + what the PBX guy has to configure on the Siemens side.
>>>
>>> Thanks alot.
>>>
>>>
>>>
>>> On Fri, Mar 11, 2011 at 1:17 AM, Edwin Lam <edwin.lam at officegeneral.com>wrote:
>>>
>>>> On 3/10/11 6:43 AM, Bobola Oke wrote:
>>>>
>>>>>
>>>>> The telco has a DB9 terminated interface straight to the PBX and I
>>>>> cannot make
>>>>> sense out of the interface for the PBX. What kind of interface is this?
>>>>> How do I
>>>>> connect the RJ48 of the PRI cards to make this whole setting work.
>>>>>
>>>>
>>>> searching through this list's archive and found this:
>>>>
>>>> http://lists.digium.com/pipermail/asterisk-users/2006-December/174258.html
>>>>
>>>>
>>>> --
>>>> Edwin Lam <edwin.lam at officegeneral.com>
>>>> Systems Engineer, OfficeWyze, Inc.
>>>> Ph: <%2B1%20415%20439%204988> <%2B1%20415%20439%204988><%2B1%20415%20439%204988>+1
>>>> 415 439 4988 Fax: <%2B1%20415%20283%203370> <%2B1%20415%20283%203370><%2B1%20415%20283%203370>+1
>>>> 415 283 3370
>>>> http://pgpkeys.mit.edu:11371/pks/lookup?op=get&search=0xD6506D20
>>>>
>>>>
>>>>
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>>              http://www.asterisk.org/hello
>>>>
>>>> asterisk-users mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>  http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110330/94b5dc5d/attachment.htm>