[asterisk-users] DAHDI Help (made a cardinal sin :()

[Gareth Blades]

--[ UxBoD ]-- wrote:
> Looking for some help from the UK please.  I backed up all my Asterisk configuration before re-installing the server from 32 -> 64 bit.  Unfortunately I did not transfer the backup to another machine!!!!!
> 
> I now have a TDM400P that is not picking up the line.  Can you see what I have done wrong when I have rebuilt the config please:
> 
> dahdi_scan
> ----------
> [1]
> active=yes
> alarms=OK
> description=Wildcard TDM400P REV E/F Board 5
> name=WCTDM/4
> manufacturer=Digium
> devicetype=Wildcard TDM400P REV E/F
> location=PCI Bus 02 Slot 02
> basechan=1
> totchans=4
> irq=169
> type=analog
> port=1,FXO
> port=2,none
> port=3,none
> port=4,none
> 
> /etc/dahdi/system.conf
> ----------------------
> fxsks=1
> echocanceller=mg2,1
> loadzone        = uk
> defaultzone     = uk
> 
> dmesg when loaded dadhi
> -----------------------
> dahdi: Telephony Interface Registered on major 196
> dahdi: Version: 2.3.0.1
> Freshmaker version: 71
> Freshmaker passed register test
> Module 0: Installed -- AUTO FXO (UK mode)
> Module 1: Not installed
> Module 2: Not installed
> Module 3: Not installed
> Found a Wildcard TDM: Wildcard TDM400P REV E/F (1 modules)
> dahdi: Registered tone zone 0 (United States / North America)
> dahdi_echocan_mg2: Registered echo canceler 'MG2'
> dahdi: Registered tone zone 4 (United Kingdom)
> 
> /etc/asterisk/chan_dahdi.conf
> -----------------------------
> [channels]
> language=en
> usecallerid=yes
> cidsignalling=v23
> sendcalleridafter = 2
> rxgain=2.0
> txgain=3.0
> progzone=uk
> signalling=fxo_ks
> callerid=asreceived
> group=0
> context=inbound-dahdi
> channel => 1
> callerid=
> group=
> context=inbound-dahdi
> 
> /etc/asterisk/dahdi-channels.conf
> ---------------------------------
> ; Autogenerated by /usr/sbin/dahdi_genconf on Thu May 27 13:25:14 2010
> ; If you edit this file and execute /usr/sbin/dahdi_genconf again,
> ; your manual changes will be LOST.
> ; Dahdi Channels Configurations (chan_dahdi.conf)
> ;
> ; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
> ; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
> ;
> 
> ; Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
> ;;; line="1 WCTDM/4/0 FXSKS"
> signalling=fxs_ks
> callerid=asreceived
> group=0
> context=inbound-dahdi
> channel => 1
> callerid=
> group=
> context=default
> 
> Really need some help please, Gordon ;)
> 
> Thank you all.
> 
in chan_dahdi.conf are you sure you have the correct signalling defined?
Shouldnt it be fxs_ks in both places?