[asterisk-users] DAHDI Help (made a cardinal sin :()

[--[ UxBoD ]--]

Looking for some help from the UK please.  I backed up all my Asterisk configuration before re-installing the server from 32 -> 64 bit.  Unfortunately I did not transfer the backup to another machine!!!!!

I now have a TDM400P that is not picking up the line.  Can you see what I have done wrong when I have rebuilt the config please:

dahdi_scan
----------
[1]
active=yes
alarms=OK
description=Wildcard TDM400P REV E/F Board 5
name=WCTDM/4
manufacturer=Digium
devicetype=Wildcard TDM400P REV E/F
location=PCI Bus 02 Slot 02
basechan=1
totchans=4
irq=169
type=analog
port=1,FXO
port=2,none
port=3,none
port=4,none

/etc/dahdi/system.conf
----------------------
fxsks=1
echocanceller=mg2,1
loadzone        = uk
defaultzone     = uk

dmesg when loaded dadhi
-----------------------
dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.3.0.1
Freshmaker version: 71
Freshmaker passed register test
Module 0: Installed -- AUTO FXO (UK mode)
Module 1: Not installed
Module 2: Not installed
Module 3: Not installed
Found a Wildcard TDM: Wildcard TDM400P REV E/F (1 modules)
dahdi: Registered tone zone 0 (United States / North America)
dahdi_echocan_mg2: Registered echo canceler 'MG2'
dahdi: Registered tone zone 4 (United Kingdom)

/etc/asterisk/chan_dahdi.conf
-----------------------------
[channels]
language=en
usecallerid=yes
cidsignalling=v23
sendcalleridafter = 2
rxgain=2.0
txgain=3.0
progzone=uk
signalling=fxo_ks
callerid=asreceived
group=0
context=inbound-dahdi
channel => 1
callerid=
group=
context=inbound-dahdi

/etc/asterisk/dahdi-channels.conf
---------------------------------
; Autogenerated by /usr/sbin/dahdi_genconf on Thu May 27 13:25:14 2010
; If you edit this file and execute /usr/sbin/dahdi_genconf again,
; your manual changes will be LOST.
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
;

; Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
;;; line="1 WCTDM/4/0 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=inbound-dahdi
channel => 1
callerid=
group=
context=default

Really need some help please, Gordon ;)

Thank you all.
-- 
Thanks, Phil