[asterisk-users] DAHDI Help (made a cardinal sin :()

[--[ UxBoD ]--]

----- Original Message -----
> --[ UxBoD ]-- wrote:
> > Looking for some help from the UK please. I backed up all my
> > Asterisk configuration before re-installing the server from 32 -> 64
> > bit. Unfortunately I did not transfer the backup to another
> > machine!!!!!
> >
> > I now have a TDM400P that is not picking up the line. Can you see
> > what I have done wrong when I have rebuilt the config please:
> >
> > dahdi_scan
> > ---------- [1]
> > active=yes alarms=OK
> > description=Wildcard TDM400P REV E/F Board 5
> > name=WCTDM/4 manufacturer=Digium
> > devicetype=Wildcard TDM400P REV E/F
> > location=PCI Bus 02 Slot 02
> > basechan=1 totchans=4
> > irq=169 type=analog
> > port=1,FXO port=2,none
> > port=3,none port=4,none
> >
> > /etc/dahdi/system.conf
> > ---------------------- fxsks=1
> > echocanceller=mg2,1 loadzone = uk
> > defaultzone = uk
> >
> > dmesg when loaded dadhi
> > -----------------------
> > dahdi: Telephony Interface Registered on major 196
> > dahdi: Version: 2.3.0.1
> > Freshmaker version: 71
> > Freshmaker passed register test
> > Module 0: Installed -- AUTO FXO (UK mode)
> > Module 1: Not installed
> > Module 2: Not installed
> > Module 3: Not installed
> > Found a Wildcard TDM: Wildcard TDM400P REV E/F (1 modules)
> > dahdi: Registered tone zone 0 (United States / North America)
> > dahdi_echocan_mg2: Registered echo canceler 'MG2'
> > dahdi: Registered tone zone 4 (United Kingdom)
> >
> > /etc/asterisk/chan_dahdi.conf
> > ----------------------------- [channels]
> > language=en usecallerid=yes
> > cidsignalling=v23 sendcalleridafter = 2
> > rxgain=2.0 txgain=3.0
> > progzone=uk signalling=fxo_ks
> > callerid=asreceived group=0
> > context=inbound-dahdi channel => 1
> > callerid= group=
> > context=inbound-dahdi
> >
> > /etc/asterisk/dahdi-channels.conf
> > --------------------------------- ; Autogenerated by
> > /usr/sbin/dahdi_genconf on Thu May 27 13:25:14 2010
> > ; If you edit this file and execute /usr/sbin/dahdi_genconf again,
> > ; your manual changes will be LOST.
> > ; Dahdi Channels Configurations (chan_dahdi.conf)
> > ; ; This is not intended to be a complete chan_dahdi.conf. Rather,
> > it is intended
> > ; to be #include-d by /etc/chan_dahdi.conf that will include the
> > global settings
> > ;
> >
> > ; Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
> > ;;; line="1 WCTDM/4/0 FXSKS"
> > signalling=fxs_ks callerid=asreceived
> > group=0 context=inbound-dahdi
> > channel => 1
> > callerid= group=
> > context=default
> >
> > Really need some help please, Gordon ;)
> >
> > Thank you all.
> >
> in chan_dahdi.conf are you sure you have the correct signalling
> defined? Shouldnt it be fxs_ks in both places?

Yup, that was spot on.  Thank you so so much  :)
-- 
Thanks, Phil