[asterisk-users] Unable to make outbound calls
Kal Feher
kalman.feher at melbourneit.com.au
Tue May 26 08:21:55 CDT 2009
Sorry. I don't get many opportunities to test this system as its live. Here
are the results:
-- Executing [9 at DLPN_DialPlan1:1] Dial("SIP/19722-b650fb80", "DAHDI/1")
in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called 1
-- Channel 0/1, span 1 got hangup, cause 90
WARNING[6454]: app_dial.c:765 wait_for_answer: Unable to forward voice or
dtmf
-- Hungup 'DAHDI/1-1'
== Everyone is busy/congested at this time (1:0/0/1)
On 20/5/09 3:52 PM, "Danny Nicholas" <danny at debsinc.com> wrote:
> This all looks ok. What happens if you try to access the DAHDI channel
> outside of Asterisk control:
> In dialplan
> Exten => 9,1,Dial(DAHDI/1)
>
> Dial 9
> Get dialtone
> Dial number
>
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Kal Feher
> Sent: Wednesday, May 20, 2009 2:55 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Unable to make outbound calls
>
> I attached the show channels in my first post, but removed it to reduce the
> length of replies. Here it is again along with show status.
> Note that there is only 1 PRI currently attached.
>
> geriatrix*CLI> dahdi show status
> Description Alarms IRQ bpviol
> CRC4
> T2XXP (PCI) Card 0 Span 1 OK 0 0 0
> T2XXP (PCI) Card 0 Span 2 RED 0 0 0
>
> geriatrix*CLI> dahdi show channels
> Chan Extension Context Language MOH Interpret
> pseudo default default
> 1 DID_span_1 default
> 2 DID_span_1 default
> 3 DID_span_1 default
> 4 DID_span_1 default
> 5 DID_span_1 default
> 6 DID_span_1 default
> 7 DID_span_1 default
> 8 DID_span_1 default
> 9 DID_span_1 default
> 10 DID_span_1 default
> 11 DID_span_1 default
> 12 DID_span_1 default
> 13 DID_span_1 default
> 14 DID_span_1 default
> 15 DID_span_1 default
> 16 DID_span_1 default
> 17 DID_span_1 default
> 18 DID_span_1 default
> 19 DID_span_1 default
> 20 DID_span_1 default
> 21 DID_span_1 default
> 22 DID_span_1 default
> 23 DID_span_1 default
> 25 DID_span_2 default
> 26 DID_span_2 default
> 27 DID_span_2 default
> 28 DID_span_2 default
> 29 DID_span_2 default
> 30 DID_span_2 default
> 31 DID_span_2 default
> 32 DID_span_2 default
> 33 DID_span_2 default
> 34 DID_span_2 default
> 35 DID_span_2 default
> 36 DID_span_2 default
> 37 DID_span_2 default
> 38 DID_span_2 default
> 39 DID_span_2 default
> 40 DID_span_2 default
> 41 DID_span_2 default
> 42 DID_span_2 default
> 43 DID_span_2 default
> 44 DID_span_2 default
> 45 DID_span_2 default
> 46 DID_span_2 default
> 47 DID_span_2 default
>
>
>
> On 19/5/09 6:31 PM, "Danny Nicholas" <danny at debsinc.com> wrote:
>
>> Please post your CLI output from dahdi show status and dahdi show
> channels.
>>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Kal Feher
>> Sent: Tuesday, May 19, 2009 11:22 AM
>> To: asterisk-users at lists.digium.com
>> Subject: Re: [asterisk-users] Unable to make outbound calls
>>
>>
>>> Can you make an outbound call after your first incoming call? That's
> what
>> I
>> experienced with 1.4.24.
>>
>> No I can't. I saw similar threads while searching for a solution, but in
> my
>> case outbound calls are never possible.
>>
>>
>> Regardless, thank you for your suggestion.
>>
>> On 19/5/09 4:47 PM, "Kal Feher" <kalman.feher at melbourneit.com.au> wrote:
>>
>>>> I've got an asterisk 1.4.24 box with dahdi complete 2.1.0.3+2.1.0.2
>>>>
>>>> I've got a 2 port T2XXP card attached with on T1 currently plugged in.
>>>>
>>>> Inbound calls work fine, but outbound fail with the rather cryptic:
>>>> [May 19 17:28:07] WARNING[11360]: app_dial.c:1237 dial_exec_full: Unable
>> to
>>>> create channel of type 'DAHDI' (cause 0 - Unknown)
>>>>
>>>> There are similar threads I've found on the net but they tend to be
>> related
>> to
>>>> dahdi not being loaded or similar. In my case dahdi is loaded and
>> channels
>>>> visible.
>>>>
>>>> I've rsync'd a configuration (/etc/asterisk and /etc/dahdi) from another
>>>> server that is currently working fine. But still no luck.
>>>>
>>>> Any hints would be appreciated. In particular if someone can suggest
> some
>>>> documentation on what _could_ cause a (cause 0 - Unknown) then I can
>>>> investigate those.
>>>>
>>>> Some details below:
>>>> <removed in reply to keep email readable>
>>
--
Kal
More information about the asterisk-users
mailing list