[asterisk-users] Unable to make outbound calls
Danny Nicholas
danny at debsinc.com
Wed May 20 08:52:25 CDT 2009
This all looks ok. What happens if you try to access the DAHDI channel
outside of Asterisk control:
In dialplan
Exten => 9,1,Dial(DAHDI/1)
Dial 9
Get dialtone
Dial number
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Kal Feher
Sent: Wednesday, May 20, 2009 2:55 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Unable to make outbound calls
I attached the show channels in my first post, but removed it to reduce the
length of replies. Here it is again along with show status.
Note that there is only 1 PRI currently attached.
geriatrix*CLI> dahdi show status
Description Alarms IRQ bpviol
CRC4
T2XXP (PCI) Card 0 Span 1 OK 0 0 0
T2XXP (PCI) Card 0 Span 2 RED 0 0 0
geriatrix*CLI> dahdi show channels
Chan Extension Context Language MOH Interpret
pseudo default default
1 DID_span_1 default
2 DID_span_1 default
3 DID_span_1 default
4 DID_span_1 default
5 DID_span_1 default
6 DID_span_1 default
7 DID_span_1 default
8 DID_span_1 default
9 DID_span_1 default
10 DID_span_1 default
11 DID_span_1 default
12 DID_span_1 default
13 DID_span_1 default
14 DID_span_1 default
15 DID_span_1 default
16 DID_span_1 default
17 DID_span_1 default
18 DID_span_1 default
19 DID_span_1 default
20 DID_span_1 default
21 DID_span_1 default
22 DID_span_1 default
23 DID_span_1 default
25 DID_span_2 default
26 DID_span_2 default
27 DID_span_2 default
28 DID_span_2 default
29 DID_span_2 default
30 DID_span_2 default
31 DID_span_2 default
32 DID_span_2 default
33 DID_span_2 default
34 DID_span_2 default
35 DID_span_2 default
36 DID_span_2 default
37 DID_span_2 default
38 DID_span_2 default
39 DID_span_2 default
40 DID_span_2 default
41 DID_span_2 default
42 DID_span_2 default
43 DID_span_2 default
44 DID_span_2 default
45 DID_span_2 default
46 DID_span_2 default
47 DID_span_2 default
On 19/5/09 6:31 PM, "Danny Nicholas" <danny at debsinc.com> wrote:
> Please post your CLI output from dahdi show status and dahdi show
channels.
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Kal Feher
> Sent: Tuesday, May 19, 2009 11:22 AM
> To: asterisk-users at lists.digium.com
> Subject: Re: [asterisk-users] Unable to make outbound calls
>
>
>> Can you make an outbound call after your first incoming call? That's
what
> I
> experienced with 1.4.24.
>
> No I can't. I saw similar threads while searching for a solution, but in
my
> case outbound calls are never possible.
>
>
> Regardless, thank you for your suggestion.
>
> On 19/5/09 4:47 PM, "Kal Feher" <kalman.feher at melbourneit.com.au> wrote:
>
>>> I've got an asterisk 1.4.24 box with dahdi complete 2.1.0.3+2.1.0.2
>>>
>>> I've got a 2 port T2XXP card attached with on T1 currently plugged in.
>>>
>>> Inbound calls work fine, but outbound fail with the rather cryptic:
>>> [May 19 17:28:07] WARNING[11360]: app_dial.c:1237 dial_exec_full: Unable
> to
>>> create channel of type 'DAHDI' (cause 0 - Unknown)
>>>
>>> There are similar threads I've found on the net but they tend to be
> related
> to
>>> dahdi not being loaded or similar. In my case dahdi is loaded and
> channels
>>> visible.
>>>
>>> I've rsync'd a configuration (/etc/asterisk and /etc/dahdi) from another
>>> server that is currently working fine. But still no luck.
>>>
>>> Any hints would be appreciated. In particular if someone can suggest
some
>>> documentation on what _could_ cause a (cause 0 - Unknown) then I can
>>> investigate those.
>>>
>>> Some details below:
>>> <removed in reply to keep email readable>
>
--
Kal
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list