[asterisk-users] Dialplan Priorities and Sort Order...

[Martin]

Can you clarify ? Do you want the calls first go through analogs and
when they're all in use
then through the PRI ? Is that why you're putting the priority 101 in
the PRI context ?

Martin

On Tue, May 19, 2009 at 10:37 AM, Tim Nelson <tnelson at rockbochs.com> wrote:
> Greetings!
>
> I'm hoping someone can help me with what should be the most basic of problems. Essentially, I want to have certain calls on an Asterisk 1.2.25 (Yes I know its old, upgrade, etc... its on my roadmap) install go out a couple of analog lines and all other calls go out a PRI. The analog lines are setup in Zaptel group 1 and the PRI channels are in Zaptel group 0. Here is my relevant config:
>
> ; Outbound via POTS
> [general-outbound]
> exten => _1800NXXXXXX,1,Dial(ZAP/g1/${EXTEN})
> exten => _1800NXXXXXX,n,Answer
> exten => _1800NXXXXXX,n,Busy
> exten => _1800NXXXXXX,n,Hangup
> exten => _1866NXXXXXX,n,Dial(ZAP/g1/${EXTEN})
> exten => _1866NXXXXXX,n,Answer
> exten => _1866NXXXXXX,n,Busy
> exten => _1866NXXXXXX,n,Hangup
> include => pri_outbound
>
> ; Outbound via PRI
> [pri_outbound]
> exten => _X.,101,Dial(ZAP/g0/${EXTEN})
> exten => _X.,102,Answer
> exten => _X.,103,Busy
> exten => _X.,104,Hangup
>
> I certainly cannot be the only one who wants this sort of setup... correct? Is it the way I'm including the other context, the dial patterns, the priorities, etc? I'm not opposed to combining it into a single context, I just started it out with this way. All hints are appreciated. (Pun intended.. :-) )
>
> --Tim
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>