[asterisk-users] [UK SPECIFIC] DAHDI and a OpenVox Card

[--[ UxBoD ]--]

----- "Gordon Henderson" <gordon+asterisk at drogon.net> wrote: 
> On Fri, 1 May 2009, --[ UxBoD ]-- wrote: 
> 
> > Okay, getting somewhere now ! I am now getting the following :- 
> > 
> > == Starting post polarity CID detection on channel 1 
> > -- Starting simple switch on 'DAHDI/1-1' 
> > [May 1 12:03:10] NOTICE[4360]: chan_dahdi.c:7669 ss_thread: MWI: Channel 1 message waiting! 
> > -- Executing [s at inbound-dahdi:1] Answer("DAHDI/1-1", "") in new stack 
> > -- Executing [s at inbound-dahdi:2] Ringing("DAHDI/1-1", "") in new stack 
> > -- Executing [s at inbound-dahdi:3] Wait("DAHDI/1-1", "1") in new stack 
> > -- Executing [s at inbound-dahdi:4] Playback("DAHDI/1-1", "home-message") in new stack 
> > -- <DAHDI/1-1> Playing 'home-message.gsm' (language 'en') 
> > -- Executing [s at inbound-dahdi:5] Hangup("DAHDI/1-1", "") in new stack 
> > == Spawn extension (inbound-dahdi, s, 5) exited non-zero on 'DAHDI/1-1' 
> > -- Hungup 'DAHDI/1-1' 
> > 
> > The problem is that I never actually here the message playback. On the dialling phone I just hear it keep ringing. My test dialplan is as follows :- 
> > 
> > [inbound-dahdi] 
> > exten => s,1,Answer() 
> > exten => s,n,Ringing() 
> > exten => s,n,Wait(1) 
> > exten => s,n,Playback(home-message) 
> > exten => s,n,Hangup() 
> 
> I put that in mine and get: 
> 
> == Starting post polarity CID detection on channel 4 
> -- Starting simple switch on 'Zap/4-1' 
> -- Executing Answer("Zap/4-1", "") in new stack 
> -- Executing Ringing("Zap/4-1", "") in new stack 
> -- Executing Wait("Zap/4-1", "1") in new stack 
> -- Executing Playback("Zap/4-1", "tt-ferrets") in new stack 
> -- Playing 'tt-ferrets' (language 'en') 
> -- Executing Hangup("Zap/4-1", "") in new stack 
> == Spawn extension (incoming-zap-ddi, s, 5) exited non-zero on 'Zap/4-1' 
> -- Hungup 'Zap/4-1' 
> 
> Personally I'd not put in the Ringing(), but it's doing no harm here... 
> 
> Looks like it's almost there - barring bugs in the dahdi code, but there 
> must be 1000's of people out there using it with TDM400 cards or clones... 
> The differences between UK and US lines are minimal give or take a line 
> reversal, but who knows... 
> 
> Gordon 
> 
> _______________________________________________ 
> 
Yes, I agree with you Gordon, I really do think it is a bug in the DADHI code as it never plays back the message at all.  I even tried removing the Ringing code and that makes no difference at all.  With such a simple dialplan and configuration I can only think it is how BT signals the line.  Though the fact that the dialplan does get executed suggests that it has noticed the inbound call; it just does not pick up the line :(

Best Regards,

-- 
SplatNIX IT Services :: Innovation through collaboration