[asterisk-users] Ntework Card

[David @ULC]

lspci Returns me below Output :_________________________________

[root at vicidialnow ~]# lspci
00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev
03)
00:02.0 VGA compatible controller: Intel Corporation 82G35 Express
Integrated Gr
              aphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation 82G35 Express Integrated
Graphics
         Controller (rev 03)
00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit Network
Connectio
          n (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Contolle
        r #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controll
        er #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Control
        ler #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller
           (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port
1 (r
    ev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port
2 (r
    ev 02)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port
3 (r
    ev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controll
        er #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controll
        er #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controll
        er #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Control
        ler #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface
Controll
        er (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA
IDE Co
      ntroller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev
02)
00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA
IDE Co
      ntroller (rev 02)
03:00.0 IDE interface: JMicron Technologies, Inc. JMB368 IDE controller
04:03.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet
Adapter
         (rev 11) (rev 11)
04:05.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70)



ifconfig -a Returns :
_________________________________

ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:1E:58:A7:3D:73
          inet addr:121.247.xxx.xxx  Bcast:121.247.xxx.xxx
 Mask:255.255.255.0
          inet6 addr: fe80::21e:58ff:fea7:3d73/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:415 errors:0 dropped:0 overruns:0 frame:0
          TX packets:478 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:51514 (50.3 KiB)  TX bytes:95169 (92.9 KiB)
          Interrupt:169

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:112962 errors:0 dropped:0 overruns:0 frame:0
          TX packets:112962 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:9165137 (8.7 MiB)  TX bytes:9165137 (8.7 MiB)

sit0      Link encap:IPv6-in-IPv4
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)










On Sun, Jan 25, 2009 at 2:53 PM, David @ULC <ucoms2001 at gmail.com> wrote:

> *Quote:*
>
>
> [root at vicidialnow src]# service network restart
> Shutting down interface eth0: [ OK ]
> Shutting down loopback interface: [ OK ]
> Bringing up loopback interface: [ OK ]
> Bringing up interface eth0: [ OK ]
> Bringing up interface eth1: skge device eth1 does not seem to be present,
> delaying initialization.
> [FAILED]
> [root at vicidialnow src]#
>
>
>
>
> eth1 is the Oboard card. I did install driver but its same. I am sure
> Driver is a correct one as after installing driver it showed me the card
> which is eth1 but due to soem issues I deleted that network interface from
> webmin.
>
> But now its NOT detecting.
>
> Kindly advice
> ____________
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090126/ff78aaeb/attachment.htm