[asterisk-users] Ntework Card
David @ULC
ucoms2001 at gmail.com
Mon Jan 26 04:50:46 CST 2009
I also installed the driver :
________________________________________
[root at vicidialnow ~]# tar zxf e1000-8.0.6.tar.gz
[root at vicidialnow ~]# cd e1000-8.0.6/src/
[root at vicidialnow src]# make install
make -C /lib/modules/2.6.18-53.el5/build SUBDIRS=/root/e1000-8.0.6/src
modules
make[1]: Entering directory `/usr/src/kernels/2.6.18-53.el5-i686'
Building modules, stage 2.
MODPOST
make[1]: Leaving directory `/usr/src/kernels/2.6.18-53.el5-i686'
# remove all old versions of the driver
find /lib/modules/2.6.18-53.el5 -name e1000.ko -exec rm -f {} \; || true
find /lib/modules/2.6.18-53.el5 -name e1000.ko.gz -exec rm -f {} \; || true
install -D -m 644 e1000.ko
/lib/modules/2.6.18-53.el5/kernel/drivers/net/e1000/e1000.ko
/sbin/depmod -a || true
install -D -m 644 e1000.7.gz /usr/share/man/man7/e1000.7.gz
man -c -P'cat > /dev/null' e1000 || true
On Mon, Jan 26, 2009 at 4:07 PM, David @ULC <ucoms2001 at gmail.com> wrote:
> lspci Returns me below Output :_________________________________
>
> [root at vicidialnow ~]# lspci
> 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev
> 03)
> 00:02.0 VGA compatible controller: Intel Corporation 82G35 Express
> Integrated Gr
> aphics Controller (rev 03)
> 00:02.1 Display controller: Intel Corporation 82G35 Express Integrated
> Graphics
> Controller (rev 03)
> 00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit Network
> Connectio
> n (rev 02)
> 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
> Contolle
> r #4 (rev 02)
> 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
> Controll
> er #5 (rev 02)
> 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
> Control
> ler #2 (rev 02)
> 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
> Controller
> (rev 02)
> 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port
> 1 (r
> ev 02)
> 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port
> 2 (r
> ev 02)
> 00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port
> 3 (r
> ev 02)
> 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
> Controll
> er #1 (rev 02)
> 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
> Controll
> er #2 (rev 02)
> 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
> Controll
> er #3 (rev 02)
> 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
> Control
> ler #1 (rev 02)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
> 00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface
> Controll
> er (rev 02)
> 00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA
> IDE Co
> ntroller (rev 02)
> 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev
> 02)
> 00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA
> IDE Co
> ntroller (rev 02)
> 03:00.0 IDE interface: JMicron Technologies, Inc. JMB368 IDE controller
> 04:03.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet
> Adapter
> (rev 11) (rev 11)
> 04:05.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70)
>
>
>
> ifconfig -a Returns :
> _________________________________
>
> ifconfig -a
> eth0 Link encap:Ethernet HWaddr 00:1E:58:A7:3D:73
> inet addr:121.247.xxx.xxx Bcast:121.247.xxx.xxx
> Mask:255.255.255.0
> inet6 addr: fe80::21e:58ff:fea7:3d73/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:415 errors:0 dropped:0 overruns:0 frame:0
> TX packets:478 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:51514 (50.3 KiB) TX bytes:95169 (92.9 KiB)
> Interrupt:169
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> inet6 addr: ::1/128 Scope:Host
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:112962 errors:0 dropped:0 overruns:0 frame:0
> TX packets:112962 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:9165137 (8.7 MiB) TX bytes:9165137 (8.7 MiB)
>
> sit0 Link encap:IPv6-in-IPv4
> NOARP MTU:1480 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
>
>
>
>
>
>
>
>
>
>
> On Sun, Jan 25, 2009 at 2:53 PM, David @ULC <ucoms2001 at gmail.com> wrote:
>
>> *Quote:*
>>
>>
>> [root at vicidialnow src]# service network restart
>> Shutting down interface eth0: [ OK ]
>> Shutting down loopback interface: [ OK ]
>> Bringing up loopback interface: [ OK ]
>> Bringing up interface eth0: [ OK ]
>> Bringing up interface eth1: skge device eth1 does not seem to be present,
>> delaying initialization.
>> [FAILED]
>> [root at vicidialnow src]#
>>
>>
>>
>>
>> eth1 is the Oboard card. I did install driver but its same. I am sure
>> Driver is a correct one as after installing driver it showed me the card
>> which is eth1 but due to soem issues I deleted that network interface from
>> webmin.
>>
>> But now its NOT detecting.
>>
>> Kindly advice
>> ____________
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090126/a33f6fd3/attachment.htm
More information about the asterisk-users
mailing list