[asterisk-users] Ntework Card

[David @ULC]

Sorry for Off topic Question

On Sun, Jan 25, 2009 at 10:43 PM, David @ULC <ucoms2001 at gmail.com> wrote:

> Sorry to bump it , but any help ?
> Like un-installing the driver and reinstalling it will solve the issue ?
>
> Or shld I reinstall the OS again ?
>
>
> On Sun, Jan 25, 2009 at 2:53 PM, David @ULC <ucoms2001 at gmail.com> wrote:
>
>>  *Quote:*
>>
>>
>> [root at vicidialnow src]# service network restart
>> Shutting down interface eth0: [ OK ]
>> Shutting down loopback interface: [ OK ]
>> Bringing up loopback interface: [ OK ]
>> Bringing up interface eth0: [ OK ]
>> Bringing up interface eth1: skge device eth1 does not seem to be present,
>> delaying initialization.
>> [FAILED]
>> [root at vicidialnow src]#
>>
>>
>>
>>
>> eth1 is the Oboard card. I did install driver but its same. I am sure
>> Driver is a correct one as after installing driver it showed me the card
>> which is eth1 but due to soem issues I deleted that network interface from
>> webmin.
>>
>> But now its NOT detecting.
>>
>> Kindly advice
>> ____________
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090125/51772824/attachment.htm