[Asterisk-Users] TDM

[Curt Shaffer]

This is not *@H it is asterisk with FreePBX only. Yes the phone line is
connected to the right port. No luck. Thanks.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of John Novack
Sent: Saturday, May 27, 2006 11:02 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] TDM



Steve Totaro wrote:

> Is your machine seeing the card? /var/log/messages? Are you loading 
> the zaptel drivers? modprobe zaptel, modprobe wctdm?
>
Would he get the ztcfg message if it were not?
Is the phone line plugged into the correct jack?
With only one module installed, the other three jacks lead to nowhere.
Also this seems to be Asterisk at home from the references, so perhaps 
there is a context issue that the configuration files address.
AAH can really lead one down the garden path!

John Novack

> Curt Shaffer wrote:
>
>>
>> The TDM01B is 4 port capable but has only 1 FXO module. I'm running 
>> asterisk 1.2.7 and zaptel 1.2.5. I cannot seem to get the TDM01B 
>> working. When I do the zttool it shows 4/1/0. I can dial out from a 
>> POTS phone up to the point that the cable plugs into the card.
>>
>> Here is my /etc/zaptel.conf
>>
>> loadzone=us
>>
>> fxsks=1
>>
>> and here is my /etc/Zapata.conf
>>
>> [channels]
>>
>> language=en
>>
>> #include zapata_additional.conf
>>
>> context=from-zaptel
>>
>> signalling=fxs_ks
>>
>> faxdetect=incoming
>>
>> usecallerid=asreceived
>>
>> echocancel=yes
>>
>> callprogress=no
>>
>> busydetect=no
>>
>> echocancelwhenbridged=no
>>
>> echotraining=800
>>
>> group=0
>>
>> channel=>1
>>
>> When I dial in Asterisk does not even show an initiation of the call. 
>> When I dial out on that trunk I get all circuits busy. Ztcfg -vvv 
>> shows the following
>>
>> ztcfg -vvv
>>
>> Zaptel Configuration
>>
>> ======================
>>
>> Channel map:
>>
>> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
>>
>> 1 channels configured.
>>
>> Any help would be appreciated.
>>
>> Curt 
>
>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users