[Asterisk-Users] TDM

Steve Totaro stotaro at asteriskhelpdesk.com
Sat May 27 20:16:38 MST 2006


Debug output is the only way to help you.

John Novack wrote:
>
>
> Steve Totaro wrote:
>
>> Is your machine seeing the card? /var/log/messages? Are you loading 
>> the zaptel drivers? modprobe zaptel, modprobe wctdm?
>>
> Would he get the ztcfg message if it were not?
> Is the phone line plugged into the correct jack?
> With only one module installed, the other three jacks lead to nowhere.
> Also this seems to be Asterisk at home from the references, so perhaps 
> there is a context issue that the configuration files address.
> AAH can really lead one down the garden path!
>
> John Novack
>
>> Curt Shaffer wrote:
>>
>>>
>>> The TDM01B is 4 port capable but has only 1 FXO module. I’m running 
>>> asterisk 1.2.7 and zaptel 1.2.5. I cannot seem to get the TDM01B 
>>> working. When I do the zttool it shows 4/1/0. I can dial out from a 
>>> POTS phone up to the point that the cable plugs into the card.
>>>
>>> Here is my /etc/zaptel.conf
>>>
>>> loadzone=us
>>>
>>> fxsks=1
>>>
>>> and here is my /etc/Zapata.conf
>>>
>>> [channels]
>>>
>>> language=en
>>>
>>> #include zapata_additional.conf
>>>
>>> context=from-zaptel
>>>
>>> signalling=fxs_ks
>>>
>>> faxdetect=incoming
>>>
>>> usecallerid=asreceived
>>>
>>> echocancel=yes
>>>
>>> callprogress=no
>>>
>>> busydetect=no
>>>
>>> echocancelwhenbridged=no
>>>
>>> echotraining=800
>>>
>>> group=0
>>>
>>> channel=>1
>>>
>>> When I dial in Asterisk does not even show an initiation of the 
>>> call. When I dial out on that trunk I get all circuits busy. Ztcfg 
>>> –vvv shows the following
>>>
>>> ztcfg -vvv
>>>
>>> Zaptel Configuration
>>>
>>> ======================
>>>
>>> Channel map:
>>>
>>> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
>>>
>>> 1 channels configured.
>>>
>>> Any help would be appreciated.
>>>
>>> Curt 
>>
>>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>




More information about the asterisk-users mailing list