[Asterisk-Users] Installing the none commercial intel g729codecs into Asterisk@Home 2.2?

[Francesco Peeters (Asterisk)]

On Sun, January 22, 2006 13:02, Charles Wang said:
> I have the same problem too.
> I install the G.729 (IPP) to asterisk 1.0.x, and it works well.
> When I change asterisk from 1.0.x to 1.2.x, and G.729 seems work fine.
> I can use "show translation" and find it too. But when I make a call
> using G.729.
> The asterisk (1.2.1) crashed. If i mark the line "allow=g729" from
> sip.conf.
> And asterisk works fine.
>
Just tested with 1.2 trunk to another 1.2 machine with g729, and all
worked fine!

-- 
F Peeters
  PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch
  2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0
    Cologne HFC-S pins #52, #54, #55 connected in parallel for synching.
  AMD Duron 1GHz - 1GB - * 1.2.1
  2 Sweex HFC-PCI cards