[Asterisk-Users] Installing the none commercial intel g729codecs
into Asterisk@Home 2.2?
sdcharly at gmail.com
sdcharly at gmail.com
Sun Jan 22 05:49:55 MST 2006
Hi,
I tried a lot on these before to get in running on my A at H 2.2 but without
success.
Recently i bought 2 channels from diguim and installed it. It works well.
Just wanna know if i can install the non-commercial version to get more
channels. Will it create problems for my purchased one's?
Anyone did that? Pls comment.
Also if anyone know which .so to chose. Im using a P4 2.66 with HT.
Thanks in advance
Dan
On 22/01/06, Charles Wang <lazy.charles at gmail.com> wrote:
>
> I have the same problem too.
> I install the G.729 (IPP) to asterisk 1.0.x, and it works well.
> When I change asterisk from 1.0.x to 1.2.x, and G.729 seems work fine.
> I can use "show translation" and find it too. But when I make a call
> using G.729.
> The asterisk (1.2.1) crashed. If i mark the line "allow=g729" from
> sip.conf.
> And asterisk works fine.
>
> 2006/1/22, Guillermo Salas M <gsalas at manta.telconet.net>:
> > Con fecha 21/1/2006, "Francesco Peeters (Asterisk)"
> > <francesco at fampeeters.com> escribió:
> >
> > >On Sat, January 21, 2006 23:21, Franz Bräuer said:
> > >> Hi,
> > >>
> > >> MapsAir wrote:
> > >>> Has anyone successfully Installing the none commercial intel g729
> codecs
> > >>> into Asterisk at Home 2.2?
> >
> > I'm using g723.1 and works very well.
> >
> > >>
> > >> Installed them today. Installing from source didn't work for me
> (Debian,
> > >> Asterisk 1.2 from svn) but just adding the binaries (see the wiki on
> > >> voip.org) did the job. Have you already tried the binaries?
> > >>
> > >
> > >Kewl! Those work like a treat!
> > >
> > >As my testbox is a PII-750 running A at H 2.2 I did:
> > >
> > >cd /usr/lib/asterisk/modules/
> > >wget http://kvin.lv/pub/Linux/Asterisk/codec_g723-gcc-pentium2.so
> > >wget http://kvin.lv/pub/Linux/Asterisk/codec_g729-gcc-pentium2.so
> > >
> > >After reloading, 'show translation' gives:
> > > Translation times between formats (in milliseconds)
> > > Source Format (Rows) Destination Format(Columns)
> > >
> > > g723 gsm ulaw alaw g726 adpcm slin lpc10 g729
> speex ilbc
> > > g723 - 22 8 8 17 8 7 24 115
> 198 97
> > > gsm 151 - 7 7 16 7 6 23 114
> 197 96
> > > ulaw 146 16 - 1 11 2 1 18 109
> 192 91
> > > alaw 146 16 1 - 11 2 1 18 109
> 192 91
> > > g726 154 24 10 10 - 10 9 26 117
> 200 99
> > > adpcm 146 16 2 2 11 - 1 18 109
> 192 91
> > > slin 145 15 1 1 10 1 - 17 108
> 191 90
> > > lpc10 161 31 17 17 26 17 16 - 124 207
> 106
> > > g729 169 39 25 25 34 25 24 41 - 215
> 114
> > > speex 160 30 16 16 25 16 15 32 123 -
> 105
> > > ilbc 173 43 29 29 38 29 28 45 136 219
> -
> > >
> > >Jolly good show, old chap!
> > >
> > >--
> > >F Peeters
> > > PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch
> > > 2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0
> > > Cologne HFC-S pins #52, #54, #55 connected in parallel for
> synching.
> > > AMD Duron 1GHz - 1GB - * 1.2.1
> > > 2 Sweex HFC-PCI cards
> > >_______________________________________________
> > >--Bandwidth and Colocation provided by Easynews.com --
> > >
> > >Asterisk-Users mailing list
> > >To UNSUBSCRIBE or update options visit:
> > > http://lists.digium.com/mailman/listinfo/asterisk-user
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
> --
>
> Best Regards
> Charles
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060122/e5b72a23/attachment.htm
More information about the asterisk-users
mailing list