[Asterisk-Users] Installing the none commercial intel
g729codecsinto Asterisk@Home 2.2?
Maps
mapsair at hotmail.com
Mon Jan 23 14:48:01 MST 2006
Dear Charles Wang and all Asterisk users and supporters!
Thank Charles for giving me this intruction and it works greate for me after
I copy the into the modules directory. I didn't know if that easy.
However, after I copy and did the reload command, it didn't work until I
have to do the restart now.
Again, Thank Charles! and hope you guys enjoy the new version of asterisk.
Regards,
Lan.
----- Original Message -----
From: "Charles Wang" <lazy.charles at gmail.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Sunday, January 22, 2006 6:02 AM
Subject: Re: [Asterisk-Users] Installing the none commercial intel
g729codecsinto Asterisk at Home 2.2?
I have the same problem too.
I install the G.729 (IPP) to asterisk 1.0.x, and it works well.
When I change asterisk from 1.0.x to 1.2.x, and G.729 seems work fine.
I can use "show translation" and find it too. But when I make a call
using G.729.
The asterisk (1.2.1) crashed. If i mark the line "allow=g729" from sip.conf.
And asterisk works fine.
2006/1/22, Guillermo Salas M <gsalas at manta.telconet.net>:
> Con fecha 21/1/2006, "Francesco Peeters (Asterisk)"
> <francesco at fampeeters.com> escribió:
>
> >On Sat, January 21, 2006 23:21, Franz Bräuer said:
> >> Hi,
> >>
> >> MapsAir wrote:
> >>> Has anyone successfully Installing the none commercial intel g729
codecs
> >>> into Asterisk at Home 2.2?
>
> I'm using g723.1 and works very well.
>
> >>
> >> Installed them today. Installing from source didn't work for me
(Debian,
> >> Asterisk 1.2 from svn) but just adding the binaries (see the wiki on
> >> voip.org) did the job. Have you already tried the binaries?
> >>
> >
> >Kewl! Those work like a treat!
> >
> >As my testbox is a PII-750 running A at H 2.2 I did:
> >
> >cd /usr/lib/asterisk/modules/
> >wget http://kvin.lv/pub/Linux/Asterisk/codec_g723-gcc-pentium2.so
> >wget http://kvin.lv/pub/Linux/Asterisk/codec_g729-gcc-pentium2.so
> >
> >After reloading, 'show translation' gives:
> > Translation times between formats (in milliseconds)
> > Source Format (Rows) Destination Format(Columns)
> >
> > g723 gsm ulaw alaw g726 adpcm slin lpc10 g729 speex ilbc
> > g723 - 22 8 8 17 8 7 24 115 198 97
> > gsm 151 - 7 7 16 7 6 23 114 197 96
> > ulaw 146 16 - 1 11 2 1 18 109 192 91
> > alaw 146 16 1 - 11 2 1 18 109 192 91
> > g726 154 24 10 10 - 10 9 26 117 200 99
> > adpcm 146 16 2 2 11 - 1 18 109 192 91
> > slin 145 15 1 1 10 1 - 17 108 191 90
> > lpc10 161 31 17 17 26 17 16 - 124 207 106
> > g729 169 39 25 25 34 25 24 41 - 215 114
> > speex 160 30 16 16 25 16 15 32 123 - 105
> > ilbc 173 43 29 29 38 29 28 45 136 219 -
> >
> >Jolly good show, old chap!
> >
> >--
> >F Peeters
> > PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch
> > 2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0
> > Cologne HFC-S pins #52, #54, #55 connected in parallel for synching.
> > AMD Duron 1GHz - 1GB - * 1.2.1
> > 2 Sweex HFC-PCI cards
> >_______________________________________________
> >--Bandwidth and Colocation provided by Easynews.com --
> >
> >Asterisk-Users mailing list
> >To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-user
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
--
Best Regards
Charles
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list