[Asterisk-Users] newbie install problem. And I alreadysearchedeverywhere!

[Stijn Jonker]

Jeroen,

On 04-Sep-2005 19:34, Jeroen Baten wrote:
> Op zondag 4 september 2005 11:10, schreef Stijn Jonker:
> 
>>Hello Jeroen,
>>
>>On 04-Sep-2005 9:22, Jeroen Baten wrote:
>>
>>>Op zondag 4 september 2005 09:07, schreef Jeroen Baten:
>>>
>>>>Op zondag 4 september 2005 00:21, schreef brett at websmyths.com:
>>>>
>>>>>Ok - what the heck is this?--------------------v
>>>>>Dial("SIP/4001-2fea", "Zap/2/<mycellphonenumber}")
>>>>>
>>>>>I've never seen a } used in a dial statement...
>>>>
>>>>sorry, one } to many. in extensions it reads:
>>>>exten => _97.,1,Dial(Zap/2/${EXTEN:2})
>>>>
>>>>still no joy though. Even changed the timeout:
>>>>
>>>>Executing Dial("SIP/4001-b455", "Zap/2/456343|15") in new stack
>>>>   -- Called 2/456343
>>>>   -- Channel 0/2, span 1 got hangup
>>>>   -- Hungup 'Zap/2-1'
>>>> == No one is available to answer at this time
>>
>>What ISDN card do you have? It sounds like a quadbri, and that your in
>>the netherlands, so am I. That leaves one question is it directly
>>connected to a kpn line or via an other pbx/pabx?

> I have a BRI 2-channel Eicon Diva on KPN and yes, look at the sig, I'm dutch.
> 
> Which part of your conf should I use and not use?

That depends on the driver, do you use chan_capi or junghanns bristuff
for the eicon?

P.S. That you where dutch I figured out, but looking at i2rs.nl you
deliver services so it could have been in germany or so... ;-) Never
expect the usual, always expect the unusual ;-)

Stijn

-- 
Met Vriendelijke groet/Yours Sincerely
Stijn Jonker <SJCJonker at sjc.nl>