[Asterisk-Users] newbie install problem. And I alreadysearchedeverywhere!

[Armin Schindler]

On Sun, 4 Sep 2005, Stijn Jonker wrote:
> On 04-Sep-2005 19:34, Jeroen Baten wrote:
> > Op zondag 4 september 2005 11:10, schreef Stijn Jonker:
> > 
> >>Hello Jeroen,
> >>
> >>On 04-Sep-2005 9:22, Jeroen Baten wrote:
> >>
> >>>Op zondag 4 september 2005 09:07, schreef Jeroen Baten:
> >>>
> >>>>Op zondag 4 september 2005 00:21, schreef brett at websmyths.com:
> >>>>
> >>>>>Ok - what the heck is this?--------------------v
> >>>>>Dial("SIP/4001-2fea", "Zap/2/<mycellphonenumber}")
> >>>>>
> >>>>>I've never seen a } used in a dial statement...
> >>>>
> >>>>sorry, one } to many. in extensions it reads:
> >>>>exten => _97.,1,Dial(Zap/2/${EXTEN:2})
> >>>>
> >>>>still no joy though. Even changed the timeout:
> >>>>
> >>>>Executing Dial("SIP/4001-b455", "Zap/2/456343|15") in new stack
> >>>>   -- Called 2/456343
> >>>>   -- Channel 0/2, span 1 got hangup
> >>>>   -- Hungup 'Zap/2-1'
> >>>> == No one is available to answer at this time
> >>
> >>What ISDN card do you have? It sounds like a quadbri, and that your in
> >>the netherlands, so am I. That leaves one question is it directly
> >>connected to a kpn line or via an other pbx/pabx?
> 
> > I have a BRI 2-channel Eicon Diva on KPN and yes, look at the sig, I'm dutch.
> > 
> > Which part of your conf should I use and not use?
> 
> That depends on the driver, do you use chan_capi or junghanns bristuff
> for the eicon?

bristuff for Eicon Diva card? That's not possible.
Which card do you use exactly? Is it a DIVA PCI or DIVA Server card?
In case of DIVA PCI you can use mISDN/chan_misdn. For DIVA Server 
chan_capi would be your choice.

Armin