[Asterisk-Users] newbie install problem. And I alreadysearchedeverywhere!

[Jeroen Baten]

Op zondag 4 september 2005 11:10, schreef Stijn Jonker:
> Hello Jeroen,
>
> On 04-Sep-2005 9:22, Jeroen Baten wrote:
> > Op zondag 4 september 2005 09:07, schreef Jeroen Baten:
> >>Op zondag 4 september 2005 00:21, schreef brett at websmyths.com:
> >>>Ok - what the heck is this?--------------------v
> >>>Dial("SIP/4001-2fea", "Zap/2/<mycellphonenumber}")
> >>>
> >>>I've never seen a } used in a dial statement...
> >>
> >>sorry, one } to many. in extensions it reads:
> >>exten => _97.,1,Dial(Zap/2/${EXTEN:2})
> >>
> >>still no joy though. Even changed the timeout:
> >>
> >> Executing Dial("SIP/4001-b455", "Zap/2/456343|15") in new stack
> >>    -- Called 2/456343
> >>    -- Channel 0/2, span 1 got hangup
> >>    -- Hungup 'Zap/2-1'
> >>  == No one is available to answer at this time
>
> What ISDN card do you have? It sounds like a quadbri, and that your in
> the netherlands, so am I. That leaves one question is it directly
> connected to a kpn line or via an other pbx/pabx?

I have a BRI 2-channel Eicon Diva on KPN and yes, look at the sig, I'm dutch.

Which part of your conf should I use and not use?

kind regards,

-- 
  Jeroen Baten            | EMAIL :  JBATEN at I2RS.NL
 ____  _  __              | web   :  www.i2rs.nl
  |  )|_)(_               | tel   :  +31 (0)499 477 688
 _|_/_| \__)              | fax   :  +31 (0)499 476 804
Roerlaan 36, 5691 HJ, Son, the Netherlands