[Asterisk-Users] FXS interfaces

[Alessandro]

Mike,

    I got current stable release in CVS repository, and I think that Ok.
See below:

/var/log/messages 
Jun 22 17:04:35 darthvaden kernel: PCI: Found IRQ 9 for device 02:09.0
Jun 22 17:04:35 darthvaden kernel: PCI: Sharing IRQ 9 with 00:1f.5
Jun 22 17:04:35 darthvaden kernel: Freshmaker version: 71
Jun 22 17:04:35 darthvaden kernel: Freshmaker passed register test
Jun 22 17:04:35 darthvaden kernel: Module 0: Installed -- AUTO FXS/DPO
Jun 22 17:04:35 darthvaden kernel: Module 1: Installed -- AUTO FXS/DPO
Jun 22 17:04:35 darthvaden kernel: Module 2: Installed -- AUTO FXO (FCC
mode)
Jun 22 17:04:35 darthvaden kernel: Module 3: Installed -- AUTO FXO (FCC
mode)
Jun 22 17:04:35 darthvaden kernel: Found a Wildcard TDM: Wildcard
TDM400P REV E/F (4 modules)
Jun 22 17:04:35 darthvaden kernel: Registered tone zone 0 (United States
/ North America)

    But all ports are green! 

p1 -    green 

p2 - green
p3 - green
p4 - green

 Why?




> 

On Wed, 2005-06-22 at 16:30, Mike M wrote:

> On Wed, Jun 22, 2005 at 01:03:33PM -0300, Alessandro wrote:
> > Mike,
> > It's got 4 modules.  What color are the modules in positions 1, 2, 3, 4
> > 
> > on the TDM400P card?  Don't be confused by the 0-3 numbering, just add
> > 1.
> > 
> >     The colors in positions 3 and 4 are green, 1 and 2 light is off.
> 
> You should double check what you are reporting.  I deliberately
> reversed the zaptel settings on my box and got this:
> 
> [root at b2 src]# modprobe wctdm
> ZT_CHANCONFIG failed on channel 25: Invalid argument (22)
> Did you forget that FXS interfaces are configured with FXO signalling
> and that FXO interfaces use FXS signalling?
> /lib/modules/2.4.21-27.0.1.EL/misc/wctdm.o: post-install wctdm failed
> /lib/modules/2.4.21-27.0.1.EL/misc/wctdm.o: insmod wctdm failed
> [root at b2 src]# Jun 22 15:11:31 b2 kernel: PCI: Found IRQ 11 for device
> 01:0a.0
> Jun 22 15:11:31 b2 kernel: Freshmaker version: 71
> Jun 22 15:11:31 b2 kernel: Freshmaker passed register test
> Jun 22 15:11:31 b2 kernel: Module 0: Installed -- AUTO FXS/DPO
> Jun 22 15:11:31 b2 kernel: Module 1: Not installed
> Jun 22 15:11:31 b2 kernel: Module 2: Not installed
> Jun 22 15:11:31 b2 kernel: Module 3: Not installed
> Jun 22 15:11:31 b2 kernel: Found a Wildcard TDM: Wildcard TDM400P REV
> E/F (4 modules)
> 
> Look familiar?
> 
> > > > ZT_CHANCONFIG failed on channel 3: Invalid argument (22)
> > > > Did you forget that FXS interfaces are configured with FXO signalling
> > > > and that FXO interfaces use FXS signalling?
> > > > /lib/modules/2.4.21-27.EL/misc/wcfxs.o: post-install wcfxs failed
> > > > /lib/modules/2.4.21-27.EL/misc/wcfxs.o: insmod wctdm failed
> 
> Then I corrected my zaptel.conf and got this:
> 
> [root at b2 src]# modprobe wctdm
> [root at b2 src]# Jun 22 15:14:14 b2 kernel: PCI: Found IRQ 11 for device
> 01:0a.0
> Jun 22 15:14:14 b2 kernel: Freshmaker version: 71
> Jun 22 15:14:14 b2 kernel: Freshmaker passed register test
> Jun 22 15:14:14 b2 kernel: Module 0: Installed -- AUTO FXS/DPO
> Jun 22 15:14:14 b2 kernel: Module 1: Not installed
> Jun 22 15:14:14 b2 kernel: Module 2: Not installed
> Jun 22 15:14:14 b2 kernel: Module 3: Not installed
> Jun 22 15:14:14 b2 kernel: Found a Wildcard TDM: Wildcard TDM400P REV
> E/F (4 modules)
> Jun 22 15:14:14 b2 kernel: Registered tone zone 0 (United States / North
> America)
> 
> Everything works.
> 
> Your system is telling you that you have nothing in position 1 and 2, and
> red modules in position 3 and 4:
> 
> Jun 21 19:06:16 darthvaden kernel: PCI: Sharing IRQ 9 with 00:1f.5
> Jun 21 19:06:16 darthvaden kernel: Freshmaker version: 71
> Jun 21 19:06:16 darthvaden kernel: Freshmaker passed register test
> Jun 21 19:06:16 darthvaden kernel: ProSLIC 3210 version 2 is too old
> Jun 21 19:06:16 darthvaden kernel: Module 0: Not installed
> Jun 21 19:06:16 darthvaden kernel: ProSLIC 3210 version 2 is too old
> Jun 21 19:06:16 darthvaden kernel: Module 1: Not installed
> Jun 21 19:06:16 darthvaden kernel: Module 2: Installed -- AUTO FXO (FCC
> mode)
> Jun 21 19:06:16 darthvaden kernel: Module 3: Installed -- AUTO FXO (FCC
> mode)
> Jun 21 19:06:16 darthvaden kernel: Found a Wildcard TDM: Wildcard
> TDM400P REV E/F (4 modules)
> 
> Try changing your zaptel.conf to:
> 
> fxoks=1,2 
> fxsks=3,4 
> 
> You should install your green modules in position 1 and 2.
> 
> Position 1 is closest to the connectors.  Be  sure of the following:
> 
> p1 - green (closest to the connectors)
> p2 - green
> p3 - red
> p4 - red
> 
> If you still have problems after double checking everything you may need to get 
> help from the mfr or distributor.  I had 2 RMAs on a recent order.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050622/67581316/attachment.htm