<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.0.10">
</HEAD>
<BODY>
Mike,<BR>
<BR>
I got current stable release in CVS repository, and I think that Ok. See below:<BR>
<BR>
/var/log/messages <BR>
Jun 22 17:04:35 darthvaden kernel: PCI: Found IRQ 9 for device 02:09.0<BR>
Jun 22 17:04:35 darthvaden kernel: PCI: Sharing IRQ 9 with 00:1f.5<BR>
Jun 22 17:04:35 darthvaden kernel: Freshmaker version: 71<BR>
Jun 22 17:04:35 darthvaden kernel: Freshmaker passed register test<BR>
Jun 22 17:04:35 darthvaden kernel: Module 0: Installed -- AUTO FXS/DPO<BR>
Jun 22 17:04:35 darthvaden kernel: Module 1: Installed -- AUTO FXS/DPO<BR>
Jun 22 17:04:35 darthvaden kernel: Module 2: Installed -- AUTO FXO (FCC mode)<BR>
Jun 22 17:04:35 darthvaden kernel: Module 3: Installed -- AUTO FXO (FCC mode)<BR>
Jun 22 17:04:35 darthvaden kernel: Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules)<BR>
Jun 22 17:04:35 darthvaden kernel: Registered tone zone 0 (United States / North America)<BR>
<BR>
But all ports are green! <BR>
<BR>
<I>p1 - </I> <I>green
<PRE>p2 - green
p3 - </I>green
<I>p4 - </I>green
Why?</PRE>
<BR>
<BR>
<BLOCKQUOTE TYPE=CITE>
<PRE></PRE>
</BLOCKQUOTE>
On Wed, 2005-06-22 at 16:30, Mike M wrote:
<BLOCKQUOTE TYPE=CITE>
<PRE><FONT COLOR="#737373"><I>On Wed, Jun 22, 2005 at 01:03:33PM -0300, Alessandro wrote:
> Mike,
> It's got 4 modules. What color are the modules in positions 1, 2, 3, 4
>
> on the TDM400P card? Don't be confused by the 0-3 numbering, just add
> 1.
>
> The colors in positions 3 and 4 are green, 1 and 2 light is off.
You should double check what you are reporting. I deliberately
reversed the zaptel settings on my box and got this:
[root@b2 src]# modprobe wctdm
ZT_CHANCONFIG failed on channel 25: Invalid argument (22)
Did you forget that FXS interfaces are configured with FXO signalling
and that FXO interfaces use FXS signalling?
/lib/modules/2.4.21-27.0.1.EL/misc/wctdm.o: post-install wctdm failed
/lib/modules/2.4.21-27.0.1.EL/misc/wctdm.o: insmod wctdm failed
[root@b2 src]# Jun 22 15:11:31 b2 kernel: PCI: Found IRQ 11 for device
01:0a.0
Jun 22 15:11:31 b2 kernel: Freshmaker version: 71
Jun 22 15:11:31 b2 kernel: Freshmaker passed register test
Jun 22 15:11:31 b2 kernel: Module 0: Installed -- AUTO FXS/DPO
Jun 22 15:11:31 b2 kernel: Module 1: Not installed
Jun 22 15:11:31 b2 kernel: Module 2: Not installed
Jun 22 15:11:31 b2 kernel: Module 3: Not installed
Jun 22 15:11:31 b2 kernel: Found a Wildcard TDM: Wildcard TDM400P REV
E/F (4 modules)
Look familiar?
> > > ZT_CHANCONFIG failed on channel 3: Invalid argument (22)
> > > Did you forget that FXS interfaces are configured with FXO signalling
> > > and that FXO interfaces use FXS signalling?
> > > /lib/modules/2.4.21-27.EL/misc/wcfxs.o: post-install wcfxs failed
> > > /lib/modules/2.4.21-27.EL/misc/wcfxs.o: insmod wctdm failed
Then I corrected my zaptel.conf and got this:
[root@b2 src]# modprobe wctdm
[root@b2 src]# Jun 22 15:14:14 b2 kernel: PCI: Found IRQ 11 for device
01:0a.0
Jun 22 15:14:14 b2 kernel: Freshmaker version: 71
Jun 22 15:14:14 b2 kernel: Freshmaker passed register test
Jun 22 15:14:14 b2 kernel: Module 0: Installed -- AUTO FXS/DPO
Jun 22 15:14:14 b2 kernel: Module 1: Not installed
Jun 22 15:14:14 b2 kernel: Module 2: Not installed
Jun 22 15:14:14 b2 kernel: Module 3: Not installed
Jun 22 15:14:14 b2 kernel: Found a Wildcard TDM: Wildcard TDM400P REV
E/F (4 modules)
Jun 22 15:14:14 b2 kernel: Registered tone zone 0 (United States / North
America)
Everything works.
Your system is telling you that you have nothing in position 1 and 2, and
red modules in position 3 and 4:
Jun 21 19:06:16 darthvaden kernel: PCI: Sharing IRQ 9 with 00:1f.5
Jun 21 19:06:16 darthvaden kernel: Freshmaker version: 71
Jun 21 19:06:16 darthvaden kernel: Freshmaker passed register test
Jun 21 19:06:16 darthvaden kernel: ProSLIC 3210 version 2 is too old
Jun 21 19:06:16 darthvaden kernel: Module 0: Not installed
Jun 21 19:06:16 darthvaden kernel: ProSLIC 3210 version 2 is too old
Jun 21 19:06:16 darthvaden kernel: Module 1: Not installed
Jun 21 19:06:16 darthvaden kernel: Module 2: Installed -- AUTO FXO (FCC
mode)
Jun 21 19:06:16 darthvaden kernel: Module 3: Installed -- AUTO FXO (FCC
mode)
Jun 21 19:06:16 darthvaden kernel: Found a Wildcard TDM: Wildcard
TDM400P REV E/F (4 modules)
Try changing your zaptel.conf to:
fxoks=1,2
fxsks=3,4
You should install your green modules in position 1 and 2.
Position 1 is closest to the connectors. Be sure of the following:
p1 - green (closest to the connectors)
p2 - green
p3 - red
p4 - red
If you still have problems after double checking everything you may need to get
help from the mfr or distributor. I had 2 RMAs on a recent order.</I></FONT></PRE>
</BLOCKQUOTE>
</BODY>
</HTML>