[Asterisk-Users] FXS interfaces

[Mike M]

On Wed, Jun 22, 2005 at 05:19:47PM -0300, Alessandro wrote:
> Mike,
> 
>     I got current stable release in CVS repository, and I think that Ok.
> See below:
> 
> /var/log/messages 
> Jun 22 17:04:35 darthvaden kernel: PCI: Found IRQ 9 for device 02:09.0
> Jun 22 17:04:35 darthvaden kernel: PCI: Sharing IRQ 9 with 00:1f.5
> Jun 22 17:04:35 darthvaden kernel: Freshmaker version: 71
> Jun 22 17:04:35 darthvaden kernel: Freshmaker passed register test
> Jun 22 17:04:35 darthvaden kernel: Module 0: Installed -- AUTO FXS/DPO
> Jun 22 17:04:35 darthvaden kernel: Module 1: Installed -- AUTO FXS/DPO
> Jun 22 17:04:35 darthvaden kernel: Module 2: Installed -- AUTO FXO (FCC
> mode)
> Jun 22 17:04:35 darthvaden kernel: Module 3: Installed -- AUTO FXO (FCC
> mode)
> Jun 22 17:04:35 darthvaden kernel: Found a Wildcard TDM: Wildcard
> TDM400P REV E/F (4 modules)
> Jun 22 17:04:35 darthvaden kernel: Registered tone zone 0 (United States
> / North America)

Congratulations.  What were you using prior your pull from CVS?  Maybe
something old that didn't recognize the the TDM400P and its daughters?
> 
>     But all ports are green! 

Really?  Maybe they aren't making the RED FXO cards anymore.  You should
look at them carefully for p/n differences and not rely on colors.  The
zapel driver tells you what you need to know too.
> 
> p1 - green 
> p2 - green
> p3 - green
> p4 - green

I wonder if Digium will update their website?  It's got a strong
commitment to red FXO modules in the graphics.

-- 
Mike