[Asterisk-Users] Asterisk, Hylafax and T38Modem - help!

[slwatts at winckworths.co.uk]

zapata.conf? Must have missed that - but I am not using any analog cards, 
I am using capi. If this feature dependent on using zapata and compatible 
hardware then?

on a slightly different tack - tried the sipura 3000 last night, has 
anyone got this working with faxes. Set all the fax detection tones to 
yes, but it still treats a fax call just like any other voice call :-(

Thanks,

Sam.

Jon Radon <jonr800 at gmail.com> wrote on 28/09/2004 16:52:32:

> After you changed the zapata.conf per the wiki... make sure you stop
> asterisk, unload your zap drivers, reload them, then start asterisk
> again.
> 
> ----- Original Message -----
> From: slwatts at winckworths.co.uk <slwatts at winckworths.co.uk>
> Date: Tue, 28 Sep 2004 11:34:33 +0100
> Subject: [Asterisk-Users] Asterisk, Hylafax and T38Modem - help!
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> <asterisk-users at lists.digium.com>
> 
> Hi All, 
> 
> I know that this may not strictly be an asterisk issue, but if anyone
> has any ideas on this prob it would be appreciated.
> 
> I have a working asterisk setup using Suse 9.1, a BT ISDN BRI card
> (Fritz?), sipura 3000 and a few cisco 7940's. I wanted to do add
> faxing into the equation, so I thought I would try and setup the
> following:
> 
> PSTN->asterisk->hylafax->pc 
> 
> At the moment asterisk and hylafax are on the same box. I went and
> installed t38modem, hylafax, openh323 and so on.... got chan_oh323
> compiled and installed.
> 
> I can now dial an extension - it gets routed to t38modem, it picks up
> but I hear no modem tones (screeching) just silence. when I dial it
> with a fax machine the fax machine just says 'no carrier'. Looking at
> the hylafax logs I see t38modem answer but then get 'no carrier'. If I
> make t38modem dial an extension all I hear is a
> beeep.......beeep......beeep of a fax machine.
> 
> Also when I try to use fax tone detection in my exensions.conf it
> doesnt work - the call is always routed to the normal sip device and
> not the t38modem (oh323) device.  I have followed the examples on the
> wiki.
> 
> Am I doing something fundamentally wrong here? Do I also need to load
> faxcapi? I have not yet tried using the sipaura 3000 to pick up the
> incoming fax call - I will try that later.
> 
> Cheers, 
> 
>
--------------
Winckworth Sherwood Solicitors and Parliamentary Agents 
DX 148400 WESTMINSTER 5 : 35 Great Peter Street, London SW1P 3LR
Telephone 020 7593 5000 Fax 020 7593 5099

-Confidentiality- 
This email message and any attachments are confidential; they may be subject to legal professional privilege and are intended for the named recipient only. If you are not the named recipient, please return the message and enclosures immediately and delete them from your system.

-Caution- 
Before advice received only by email (whether by attachment or otherwise) may be relied on, the authenticity of the communication must be verified by means independent of email.

-Regulation- 
The firm is regulated by the Law Society. 

-Partners- 
A list of partners is available for inspection at each office of the firm and on the firm's website at http://www.winckworths.co.uk
 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040929/616f8679/attachment.htm