[Asterisk-Users] TE410P in Austria

[Wolfgang Pichler]

i've changed it now - but i still get the yellow alarm (i've changed it
to: span=1,1,0,ccs,hdb3,crc4,yellow)

this is my dmesg output after ztcfg -v
-------------
Found TE410P at base address 40100000, remapped to d8b15000
TE410P version c01a009b
FALC version: 00000005, Board ID: 00
Reg 0: 0x124b1800
Reg 1: 0x124b1000
Reg 2: 0x07fc07fc
Reg 3: 0x00000000
Reg 4: 0x00000000
Reg 5: 0x00000000
Reg 6: 0xc01a009b
Reg 7: 0x00001f00
Reg 8: 0x00000000
Reg 9: 0x00ff0000
Reg 10: 0x00000000
TE410P: Launching card: 0
TE410P: Setting up global serial parameters
Found a Wildcard: Wildcard TE410P-Xilinx
Registered tone zone 9 (Austria)
TE410P: Span 1 configured for CCS/HDB3/CRC4
SPAN 1: Primary Sync Source
TE410P: Span 2 configured for CCS/HDB3/CRC4
SPAN 2: Secondary Sync Source
wct4xxp: Setting yellow alarm on span 1
wct4xxp: Setting yellow alarm on span 2
-------------------

any other ideas ?

best regards
Wolfgang

Am Mo, den 14.06.2004 schrieb Jason Williams um 12:44:
> Wolfgang,
> 
> You need to use ccs not cas
> 
> 
> I would change your timing options to these:-
> 
> 
> -------------/etc/zaptel.conf----------------
>   span=1,1,0,ccs,hdb3,crc4
>   span=2,2,0,ccs,hdb3,crc4
>   bchan=1-15
>   bchan=17-31
>   bchan=32-46
>   bchan=48-62
>   dchan=16
>   dchan=47
> 
> 
> That should work
> 
> 
> At 12:33 14/06/2004 +0200, you wrote:
> >sorry, i don't know what you mean with: Is it the same as Telstra -
> >could you please clearify this ?
> >
> >wolfgang
> >
> >Am Mo, den 14.06.2004 schrieb Michael M. Saunders um 12:25:
> > > Is it the same as Telstra
> > >
> > > -----Original Message-----
> > > From: asterisk-users-admin at lists.digium.com
> > > [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Wolfgang
> > > Pichler
> > > Sent: Monday, 14 June 2004 8:11 PM
> > > To: Asterisk-Users Mailinglist
> > > Subject: [Asterisk-Users] TE410P in Austria
> > >
> > > hi all,
> > >
> > > i've now installed a TE410P (Quad T1/E1 Primary Card - Digium) and
> > > connected it to a primary line. My telco (eTel) only told me that they
> > > are using hdb3 and crc4. So i still don't know which coding i have to
> > > use (cas or ccs) - and what timing options i have to use.
> > >
> > > Have someone already get a card like this up in Austria with a line from
> > > eTel or from the telekom Austria ?
> > >
> > > Another technics told me that it could be that i will need a different
> > > cable - could this be ?
> > >
> > > At time my configuration is:
> > > -------------/etc/zaptel.conf----------------
> > > span=1,1,0,ccs,hdb3,crc4
> > > span=2,1,0,ccs,hdb3,crc4
> > > bchan=1-15
> > > bchan=17-31
> > > bchan=32-46
> > > bchan=48-62
> > > dchan=16
> > > dchan=47
> > >
> > > loadzone=at
> > > defaultzone=at
> > >
> > > -----------/etc/asterisk/zaptel.conf-------------
> > > [channels]
> > > switchtype = euroisdn
> > > signalling = pri_cpe
> > > pridialplan = local
> > > group = 1
> > > context = default
> > > channel => 1-15
> > > channel => 17-31
> > >
> > > switchtype = euroisdn
> > > signalling = pri_cpe
> > > pridialplan = local
> > > group = 2
> > > context=default
> > > channel => 32-46
> > > channel => 48-62
> > >
> > > Another thing - for the wct4xxp module - do i really need to restart the
> > > whole pc so that changes in /etc/zaptel.conf take effect, or do i only
> > > need to reinsert the module - rerun ztcfg ?
> > >
> > > hope someone here can help me
> > >
> > > best regards
> > > Wolfgang
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users at lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users