[Asterisk-Users] TE410P in Austria

[Jason Williams]

Wolfgang,

You need to use ccs not cas


I would change your timing options to these:-


-------------/etc/zaptel.conf----------------
  span=1,1,0,ccs,hdb3,crc4
  span=2,2,0,ccs,hdb3,crc4
  bchan=1-15
  bchan=17-31
  bchan=32-46
  bchan=48-62
  dchan=16
  dchan=47


That should work


At 12:33 14/06/2004 +0200, you wrote:
>sorry, i don't know what you mean with: Is it the same as Telstra -
>could you please clearify this ?
>
>wolfgang
>
>Am Mo, den 14.06.2004 schrieb Michael M. Saunders um 12:25:
> > Is it the same as Telstra
> >
> > -----Original Message-----
> > From: asterisk-users-admin at lists.digium.com
> > [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Wolfgang
> > Pichler
> > Sent: Monday, 14 June 2004 8:11 PM
> > To: Asterisk-Users Mailinglist
> > Subject: [Asterisk-Users] TE410P in Austria
> >
> > hi all,
> >
> > i've now installed a TE410P (Quad T1/E1 Primary Card - Digium) and
> > connected it to a primary line. My telco (eTel) only told me that they
> > are using hdb3 and crc4. So i still don't know which coding i have to
> > use (cas or ccs) - and what timing options i have to use.
> >
> > Have someone already get a card like this up in Austria with a line from
> > eTel or from the telekom Austria ?
> >
> > Another technics told me that it could be that i will need a different
> > cable - could this be ?
> >
> > At time my configuration is:
> > -------------/etc/zaptel.conf----------------
> > span=1,1,0,ccs,hdb3,crc4
> > span=2,1,0,ccs,hdb3,crc4
> > bchan=1-15
> > bchan=17-31
> > bchan=32-46
> > bchan=48-62
> > dchan=16
> > dchan=47
> >
> > loadzone=at
> > defaultzone=at
> >
> > -----------/etc/asterisk/zaptel.conf-------------
> > [channels]
> > switchtype = euroisdn
> > signalling = pri_cpe
> > pridialplan = local
> > group = 1
> > context = default
> > channel => 1-15
> > channel => 17-31
> >
> > switchtype = euroisdn
> > signalling = pri_cpe
> > pridialplan = local
> > group = 2
> > context=default
> > channel => 32-46
> > channel => 48-62
> >
> > Another thing - for the wct4xxp module - do i really need to restart the
> > whole pc so that changes in /etc/zaptel.conf take effect, or do i only
> > need to reinsert the module - rerun ztcfg ?
> >
> > hope someone here can help me
> >
> > best regards
> > Wolfgang
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users