[Asterisk-Users] How to debug? - SIP calls not coming thru

[Göran Törnqvist]

Hello, I’ve just set up SIP with asterisk using this how-to:
http://www.automated.it/guidetoasterisk.htm#_Toc49248757 but when I try
calling the number at my SIP provider (Wx3) it doesn’t come thru. I THINK I
registered to my SIP provider without any problem, in sip.conf I do:

register => My.name:passwd:user at wx3.se/12345678

If I change the password to something else I get an registration error when
doing asterisk / reload so I guess the registration went ok the first time
then when there’s no error message? I also added 2 phones to asterisk: Cisco
IP-phone 7960. I GUESS it was registered successfully because I got errors
at first because username was wrong and when I changed it to correct values
– no errors.

“sip show peers” is showing my phones:

 

Name/username    Host            Dyn Nat ACL Mask             Port
Status

cisco2/cisco2    213.1.1.1  D          255.255.255.255  5060     Unmonitored

cisco1/cisco1    213.1.1.1  D          255.255.255.255  5060     Unmonitored

wx3.se           213.1.1.1             255.255.255.255  5060     Unmonitored

3 sip peers loaded [3 online , 0 offline]

 

“sip show registry” shows:

Host                            Username       Refresh State

wx3.se:5060               MyUser            105 Registered

 

How can I debug this problem?

 

Below is what I’ve added to my config-files.

 

Sip.conf

 

[general]

context=mycontext

 

register => My.name:passwd:user at wx3.se/XXXXXXXXX

 

 

[wx3.se]

context=mycontext

type=peer

fromuser=username-here

secret=pass

fromdomain=wx3.se

 

[cisco1]

type=friend

host=dynamic

defaultip=192.111.111.111

username=cisco1

secret=mypass

dtmfmode=rfc2833 ; Choices are inband, rfc2833, or info

;mailbox=1000 ; Mailbox for message waiting indicator

context=mycontext

callerid="MyUser 1" <9053>

 

[cisco2]

(almost identical)

 

in extensions.conf:

 

[mycontext]

exten => 1,1,Dial(SIP/cisco1,20,tr)

exten => 2,1,Dial(SIP/cisco2,20,tr)

exten => 12345678,1,Dial(SIP/cisco1&SIP/cisco2,20,tr

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041214/7bf1305e/attachment.htm