[Asterisk-Users] Cannot do international dial with E1 in Spain
Linus Surguy
linus at magrathea-telecom.co.uk
Thu Nov 20 05:33:06 MST 2003
Have you tried dialling a different international number?
If you want a different one to try use +44 118 321 9001 - our switch will
play a test accouncement if you dial it.
This way might help determine if it is the far end that it rejecting your
call. It looks like that might be the case.
Linus
----- Original Message -----
From: "Antonio Castillo Villoslada" <antonio.castillo at alisys.net>
To: <asterisk-users at lists.digium.com>
Sent: Thursday, November 20, 2003 12:03 PM
Subject: [Asterisk-Users] Cannot do international dial with E1 in Spain
> Hi,
>
> I have a problem with dialling internationals numbers, and I don't now
what
> is the cause.
>
> I have one asterisk with a e100p card connected to the Telco
> (spain/telefonica) and it can dial local and national numbers without
> problems but when I try to dial a international number it hangs-up. I call
> the Telco to ask if the E1 can do international calls and it said that it
> can.
>
> I have tried with pridialplan=unknown / local / national / international /
> private and none of this work.
>
> I don't now what to do now, can any one give me a clue of what is
happening?
>
> The correct prefix is 00 to do international dialling in Spain with E1?
>
>
> -- Attempting call on Zap/g1/00353166940000 for s at test2:1 (Retry 1)
> -- Making new call for cr 37378
> > Protocol Discriminator: Q.931 (8) len=40
> > Call Ref: len= 2 (reference 4610/0x1202) (Originator)
> > Message type: SETUP (5)
> > Bearer Capability (len= 3) [ Ext: 1 Q.931 Std: 0 Info transfer
> capability: Speech (0)
> > Ext: 1 Trans mode/rate: 64kbps,
circuit-mode
> (16)
> > Ext: 1 User information layer 1: A-Law
(35)
> > Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive
> Dchan: 0
> > ChanSel: Reserved
> > Ext: 1 Coding: 0 Number Specified Channel
Type:
> 3
> > Ext: 1 Channel: 3 ]
> > Display (len= 1) [ > Display (len= 1) [ 1> Display (len= 1) [ 1 ]
> > Calling Number (len= 4) [ Ext: 0 TON: Unknown Number Type (0) NPI:
> Unknown Number Plan (0)
> > Presentation: Unknown (67) '' ]
> > Called Number (len=17) [ Ext: 1 TON: National Number (2) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '00353166940000' ]
> > Sending Complete (len= 0)
> < Protocol Discriminator: Q.931 (8) len=43
> < Call Ref: len= 2 (reference 37378/0x9202) (Terminator)
> < Message type: STATUS (125)
> < Cause (len= 3) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
Location:
> Public network serving the local user (2)
> < Ext: 1 Cause: Info. element nonexist or not
implemented
> (99), class = Protocol Error (6) ]
> < Cause data 0: 01 (1)
> < Call State (len= 1) [ Ext: 0 Coding: CCITT (ITU) standard (0) Call
state:
> Call Initiated (1)
> < Display (len=28) [ < Display (len=28) [ N< Display (len=28) [ NO<
Display
> (len=28) [ NO < Display (len=28) [ NO E< Display (len=28) [ NO EX< Display
> (len=28) [ NO EXI< Display (len=28) [ NO EXIS< Display (len=28) [ NO
EXIST<
> Display (len=28) [ NO EXISTE< Display (len=28) [ NO EXISTE < Display
> (len=28) [ NO EXISTE E< Display (len=28) [ NO EXISTE EL< Display (len=28)
> [ NO EXISTE ELE< Display (len=28) [ NO EXISTE ELEM< Display (len=28) [ NO
> EXISTE ELEME< Display (len=28) [ NO EXISTE ELEMEN< Display (len=28) [ NO
> EXISTE ELEMENT< Display (len=28) [ NO EXISTE ELEMENTO< Display (len=28)
[ NO
> EXISTE ELEMENTO < Display (len=28) [ NO EXISTE ELEMENTO D< Display
(len=28)
> [ NO EXISTE ELEMENTO DE< Display (len=28) [ NO EXISTE ELEMENTO DE <
Display
> (len=28) [ NO EXISTE ELEMENTO DE I< Display (len=28) [ NO EXISTE ELEMENTO
DE
> IN< Display (len=28) [ NO EXISTE ELEMENTO DE INF< Display (len=28) [ NO
> EXISTE ELEMENTO DE INFO< Display (len=28) [ NO EXISTE ELEMENTO DE INFOR<
> Display (len=28) [ NO EXISTE ELEMENTO DE INFORM< Display (len=28) [ NO
> EXISTE ELEMENTO DE INFORM ]
> -- Processing IE 8 (Cause)
> -- Processing IE 20 (Call State)
> -- Processing IE 40 (Display)
> < Protocol Discriminator: Q.931 (8) len=10
> < Call Ref: len= 2 (reference 37378/0x9202) (Terminator)
> < Message type: CALL PROCEEDING (2)
> < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive
> Dchan: 0
> < ChanSel: Reserved
> < Ext: 1 Coding: 0 Number Specified Channel
Type:
> 3
> < Ext: 1 Channel: 3 ]
> -- Processing IE 24 (Channel Identification)
> < Protocol Discriminator: Q.931 (8) len=33
> < Call Ref: len= 2 (reference 37378/0x9202) (Terminator)
> < Message type: DISCONNECT (69)
> < Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
Location:
> Public network serving the local user (2)
> < Ext: 1 Cause: Unallocated (unassigned) number (1),
class
> = Normal Event (0) ]
> < Progress Indicator (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0)
0:
> 0 Location: Public network serving the local user (2)
> < Ext: 1 Progress Description: Inband
> information or appropriate pattern now available. (8) ]
> < Display (len=18) [ < Display (len=18) [ N< Display (len=18) [ NU<
Display
> (len=18) [ NUM< Display (len=18) [ NUME< Display (len=18) [ NUMER< Display
> (len=18) [ NUMERO< Display (len=18) [ NUMERO < Display (len=18) [ NUMERO
N<
> Display (len=18) [ NUMERO NO< Display (len=18) [ NUMERO NO < Display
> (len=18) [ NUMERO NO A< Display (len=18) [ NUMERO NO AS< Display (len=18)
> [ NUMERO NO ASI< Display (len=18) [ NUMERO NO ASIG< Display (len=18) [
> NUMERO NO ASIGN< Display (len=18) [ NUMERO NO ASIGNA< Display (len=18) [
> NUMERO NO ASIGNAD< Display (len=18) [ NUMERO NO ASIGNADO< Display (len=18)
> [ NUMERO NO ASIGNADO ]
> -- Processing IE 8 (Cause)
> -- Processing IE 30 (Progress Indicator)
> -- Processing IE 40 (Display)
> -- Channel 3, span 1 got hangup
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication,
> peerstate Disconnect Request
> > Protocol Discriminator: Q.931 (8) len=9
> > Call Ref: len= 2 (reference 4610/0x1202) (Originator)
> > Message type: RELEASE (77)
> > Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
Location:
> Private network serving the local user (1)
> > Ext: 1 Cause: Normal Clearing (16), class = Normal
Event
> (1) ]
> -- Hungup 'Zap/3-1'
> < Protocol Discriminator: Q.931 (8) len=5
> < Call Ref: len= 2 (reference 37378/0x9202) (Terminator)
> < Message type: RELEASE COMPLETE (90)
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
> NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Active, peerstate Connect
> Request
> > Protocol Discriminator: Q.931 (8) len=9
> > Call Ref: len= 2 (reference 4607/0x11FF) (Originator)
> > Message type: DISCONNECT (69)
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
More information about the asterisk-users
mailing list