[Asterisk-Users] Cannot do international dial with E1 in Spain
Steve Underwood
steveu at coppice.org
Thu Nov 20 06:33:29 MST 2003
Hi Antonio,
This is often a pain with ISDN. What works varies from place to place.
Ahm the wonders of standards :-). Setting the dial plan to international
is probably right. When you do this you may need to drop the 00 prefix,
and start with the country code. Then again, you may not. It varies.
Experiment. Its hard to say for sure whether your line has IDD access or
not - telco staff are about as trustworthy as used car salesmen and
politician. However, most European countries don't seem to offer a
non-IDD access option for most lines.
Regards,
Steve
Antonio Castillo Villoslada wrote:
>Hi,
>
>I have a problem with dialling internationals numbers, and I don't now what
>is the cause.
>
>I have one asterisk with a e100p card connected to the Telco
>(spain/telefonica) and it can dial local and national numbers without
>problems but when I try to dial a international number it hangs-up. I call
>the Telco to ask if the E1 can do international calls and it said that it
>can.
>
>I have tried with pridialplan=unknown / local / national / international /
>private and none of this work.
>
>I don't now what to do now, can any one give me a clue of what is happening?
>
>The correct prefix is 00 to do international dialling in Spain with E1?
>
>
>-- Attempting call on Zap/g1/00353166940000 for s at test2:1 (Retry 1)
>-- Making new call for cr 37378
>
>
>>Protocol Discriminator: Q.931 (8) len=40
>>Call Ref: len= 2 (reference 4610/0x1202) (Originator)
>>Message type: SETUP (5)
>>Bearer Capability (len= 3) [ Ext: 1 Q.931 Std: 0 Info transfer
>>
>>
>capability: Speech (0)
>
>
>> Ext: 1 Trans mode/rate: 64kbps, circuit-mode
>>
>>
>(16)
>
>
>> Ext: 1 User information layer 1: A-Law (35)
>>Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive
>>
>>
>Dchan: 0
>
>
>> ChanSel: Reserved
>> Ext: 1 Coding: 0 Number Specified Channel Type:
>>
>>
>3
>
>
>> Ext: 1 Channel: 3 ]
>>Display (len= 1) [ > Display (len= 1) [ 1> Display (len= 1) [ 1 ]
>>Calling Number (len= 4) [ Ext: 0 TON: Unknown Number Type (0) NPI:
>>
>>
>Unknown Number Plan (0)
>
>
>> Presentation: Unknown (67) '' ]
>>Called Number (len=17) [ Ext: 1 TON: National Number (2) NPI:
>>
>>
>ISDN/Telephony Numbering Plan (E.164/E.163) (1) '00353166940000' ]
>
>
>>Sending Complete (len= 0)
>>
>>
>< Protocol Discriminator: Q.931 (8) len=43
>< Call Ref: len= 2 (reference 37378/0x9202) (Terminator)
>< Message type: STATUS (125)
>< Cause (len= 3) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
>Public network serving the local user (2)
>< Ext: 1 Cause: Info. element nonexist or not implemented
>(99), class = Protocol Error (6) ]
>< Cause data 0: 01 (1)
>< Call State (len= 1) [ Ext: 0 Coding: CCITT (ITU) standard (0) Call state:
>Call Initiated (1)
>< Display (len=28) [ < Display (len=28) [ N< Display (len=28) [ NO< Display
>(len=28) [ NO < Display (len=28) [ NO E< Display (len=28) [ NO EX< Display
>(len=28) [ NO EXI< Display (len=28) [ NO EXIS< Display (len=28) [ NO EXIST<
>Display (len=28) [ NO EXISTE< Display (len=28) [ NO EXISTE < Display
>(len=28) [ NO EXISTE E< Display (len=28) [ NO EXISTE EL< Display (len=28)
>[ NO EXISTE ELE< Display (len=28) [ NO EXISTE ELEM< Display (len=28) [ NO
>EXISTE ELEME< Display (len=28) [ NO EXISTE ELEMEN< Display (len=28) [ NO
>EXISTE ELEMENT< Display (len=28) [ NO EXISTE ELEMENTO< Display (len=28) [ NO
>EXISTE ELEMENTO < Display (len=28) [ NO EXISTE ELEMENTO D< Display (len=28)
>[ NO EXISTE ELEMENTO DE< Display (len=28) [ NO EXISTE ELEMENTO DE < Display
>(len=28) [ NO EXISTE ELEMENTO DE I< Display (len=28) [ NO EXISTE ELEMENTO DE
>IN< Display (len=28) [ NO EXISTE ELEMENTO DE INF< Display (len=28) [ NO
>EXISTE ELEMENTO DE INFO< Display (len=28) [ NO EXISTE ELEMENTO DE INFOR<
>Display (len=28) [ NO EXISTE ELEMENTO DE INFORM< Display (len=28) [ NO
>EXISTE ELEMENTO DE INFORM ]
>-- Processing IE 8 (Cause)
>-- Processing IE 20 (Call State)
>-- Processing IE 40 (Display)
>< Protocol Discriminator: Q.931 (8) len=10
>< Call Ref: len= 2 (reference 37378/0x9202) (Terminator)
>< Message type: CALL PROCEEDING (2)
>< Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive
>Dchan: 0
>< ChanSel: Reserved
>< Ext: 1 Coding: 0 Number Specified Channel Type:
>3
>< Ext: 1 Channel: 3 ]
>-- Processing IE 24 (Channel Identification)
>< Protocol Discriminator: Q.931 (8) len=33
>< Call Ref: len= 2 (reference 37378/0x9202) (Terminator)
>< Message type: DISCONNECT (69)
>< Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
>Public network serving the local user (2)
>< Ext: 1 Cause: Unallocated (unassigned) number (1), class
>= Normal Event (0) ]
>< Progress Indicator (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0:
>0 Location: Public network serving the local user (2)
>< Ext: 1 Progress Description: Inband
>information or appropriate pattern now available. (8) ]
>< Display (len=18) [ < Display (len=18) [ N< Display (len=18) [ NU< Display
>(len=18) [ NUM< Display (len=18) [ NUME< Display (len=18) [ NUMER< Display
>(len=18) [ NUMERO< Display (len=18) [ NUMERO < Display (len=18) [ NUMERO N<
>Display (len=18) [ NUMERO NO< Display (len=18) [ NUMERO NO < Display
>(len=18) [ NUMERO NO A< Display (len=18) [ NUMERO NO AS< Display (len=18)
>[ NUMERO NO ASI< Display (len=18) [ NUMERO NO ASIG< Display (len=18) [
>NUMERO NO ASIGN< Display (len=18) [ NUMERO NO ASIGNA< Display (len=18) [
>NUMERO NO ASIGNAD< Display (len=18) [ NUMERO NO ASIGNADO< Display (len=18)
>[ NUMERO NO ASIGNADO ]
>-- Processing IE 8 (Cause)
>-- Processing IE 30 (Progress Indicator)
>-- Processing IE 40 (Display)
>-- Channel 3, span 1 got hangup
>NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication,
>peerstate Disconnect Request
>
>
>>Protocol Discriminator: Q.931 (8) len=9
>>Call Ref: len= 2 (reference 4610/0x1202) (Originator)
>>Message type: RELEASE (77)
>>Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
>>
>>
>Private network serving the local user (1)
>
>
>> Ext: 1 Cause: Normal Clearing (16), class = Normal Event
>>
>>
>(1) ]
>-- Hungup 'Zap/3-1'
>< Protocol Discriminator: Q.931 (8) len=5
>< Call Ref: len= 2 (reference 37378/0x9202) (Terminator)
>< Message type: RELEASE COMPLETE (90)
>NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
>NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
>NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Active, peerstate Connect
>Request
>
>
>>Protocol Discriminator: Q.931 (8) len=9
>>Call Ref: len= 2 (reference 4607/0x11FF) (Originator)
>>Message type: DISCONNECT (69)
>>
>>
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
More information about the asterisk-users
mailing list