[Asterisk-Users] Cannot do international dial with E1 in Spain
Antonio Castillo Villoslada
antonio.castillo at alisys.net
Thu Nov 20 05:03:03 MST 2003
Hi,
I have a problem with dialling internationals numbers, and I don't now what
is the cause.
I have one asterisk with a e100p card connected to the Telco
(spain/telefonica) and it can dial local and national numbers without
problems but when I try to dial a international number it hangs-up. I call
the Telco to ask if the E1 can do international calls and it said that it
can.
I have tried with pridialplan=unknown / local / national / international /
private and none of this work.
I don't now what to do now, can any one give me a clue of what is happening?
The correct prefix is 00 to do international dialling in Spain with E1?
-- Attempting call on Zap/g1/00353166940000 for s at test2:1 (Retry 1)
-- Making new call for cr 37378
> Protocol Discriminator: Q.931 (8) len=40
> Call Ref: len= 2 (reference 4610/0x1202) (Originator)
> Message type: SETUP (5)
> Bearer Capability (len= 3) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: Speech (0)
> Ext: 1 Trans mode/rate: 64kbps, circuit-mode
(16)
> Ext: 1 User information layer 1: A-Law (35)
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive
Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type:
3
> Ext: 1 Channel: 3 ]
> Display (len= 1) [ > Display (len= 1) [ 1> Display (len= 1) [ 1 ]
> Calling Number (len= 4) [ Ext: 0 TON: Unknown Number Type (0) NPI:
Unknown Number Plan (0)
> Presentation: Unknown (67) '' ]
> Called Number (len=17) [ Ext: 1 TON: National Number (2) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '00353166940000' ]
> Sending Complete (len= 0)
< Protocol Discriminator: Q.931 (8) len=43
< Call Ref: len= 2 (reference 37378/0x9202) (Terminator)
< Message type: STATUS (125)
< Cause (len= 3) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
Public network serving the local user (2)
< Ext: 1 Cause: Info. element nonexist or not implemented
(99), class = Protocol Error (6) ]
< Cause data 0: 01 (1)
< Call State (len= 1) [ Ext: 0 Coding: CCITT (ITU) standard (0) Call state:
Call Initiated (1)
< Display (len=28) [ < Display (len=28) [ N< Display (len=28) [ NO< Display
(len=28) [ NO < Display (len=28) [ NO E< Display (len=28) [ NO EX< Display
(len=28) [ NO EXI< Display (len=28) [ NO EXIS< Display (len=28) [ NO EXIST<
Display (len=28) [ NO EXISTE< Display (len=28) [ NO EXISTE < Display
(len=28) [ NO EXISTE E< Display (len=28) [ NO EXISTE EL< Display (len=28)
[ NO EXISTE ELE< Display (len=28) [ NO EXISTE ELEM< Display (len=28) [ NO
EXISTE ELEME< Display (len=28) [ NO EXISTE ELEMEN< Display (len=28) [ NO
EXISTE ELEMENT< Display (len=28) [ NO EXISTE ELEMENTO< Display (len=28) [ NO
EXISTE ELEMENTO < Display (len=28) [ NO EXISTE ELEMENTO D< Display (len=28)
[ NO EXISTE ELEMENTO DE< Display (len=28) [ NO EXISTE ELEMENTO DE < Display
(len=28) [ NO EXISTE ELEMENTO DE I< Display (len=28) [ NO EXISTE ELEMENTO DE
IN< Display (len=28) [ NO EXISTE ELEMENTO DE INF< Display (len=28) [ NO
EXISTE ELEMENTO DE INFO< Display (len=28) [ NO EXISTE ELEMENTO DE INFOR<
Display (len=28) [ NO EXISTE ELEMENTO DE INFORM< Display (len=28) [ NO
EXISTE ELEMENTO DE INFORM ]
-- Processing IE 8 (Cause)
-- Processing IE 20 (Call State)
-- Processing IE 40 (Display)
< Protocol Discriminator: Q.931 (8) len=10
< Call Ref: len= 2 (reference 37378/0x9202) (Terminator)
< Message type: CALL PROCEEDING (2)
< Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive
Dchan: 0
< ChanSel: Reserved
< Ext: 1 Coding: 0 Number Specified Channel Type:
3
< Ext: 1 Channel: 3 ]
-- Processing IE 24 (Channel Identification)
< Protocol Discriminator: Q.931 (8) len=33
< Call Ref: len= 2 (reference 37378/0x9202) (Terminator)
< Message type: DISCONNECT (69)
< Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
Public network serving the local user (2)
< Ext: 1 Cause: Unallocated (unassigned) number (1), class
= Normal Event (0) ]
< Progress Indicator (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0:
0 Location: Public network serving the local user (2)
< Ext: 1 Progress Description: Inband
information or appropriate pattern now available. (8) ]
< Display (len=18) [ < Display (len=18) [ N< Display (len=18) [ NU< Display
(len=18) [ NUM< Display (len=18) [ NUME< Display (len=18) [ NUMER< Display
(len=18) [ NUMERO< Display (len=18) [ NUMERO < Display (len=18) [ NUMERO N<
Display (len=18) [ NUMERO NO< Display (len=18) [ NUMERO NO < Display
(len=18) [ NUMERO NO A< Display (len=18) [ NUMERO NO AS< Display (len=18)
[ NUMERO NO ASI< Display (len=18) [ NUMERO NO ASIG< Display (len=18) [
NUMERO NO ASIGN< Display (len=18) [ NUMERO NO ASIGNA< Display (len=18) [
NUMERO NO ASIGNAD< Display (len=18) [ NUMERO NO ASIGNADO< Display (len=18)
[ NUMERO NO ASIGNADO ]
-- Processing IE 8 (Cause)
-- Processing IE 30 (Progress Indicator)
-- Processing IE 40 (Display)
-- Channel 3, span 1 got hangup
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication,
peerstate Disconnect Request
> Protocol Discriminator: Q.931 (8) len=9
> Call Ref: len= 2 (reference 4610/0x1202) (Originator)
> Message type: RELEASE (77)
> Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
Private network serving the local user (1)
> Ext: 1 Cause: Normal Clearing (16), class = Normal Event
(1) ]
-- Hungup 'Zap/3-1'
< Protocol Discriminator: Q.931 (8) len=5
< Call Ref: len= 2 (reference 37378/0x9202) (Terminator)
< Message type: RELEASE COMPLETE (90)
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Active, peerstate Connect
Request
> Protocol Discriminator: Q.931 (8) len=9
> Call Ref: len= 2 (reference 4607/0x11FF) (Originator)
> Message type: DISCONNECT (69)
More information about the asterisk-users
mailing list