[Asterisk-Users] channel bank configuration

[Steven Critchfield]

On Fri, 2003-07-11 at 10:14, Don Pobanz wrote:
> It is OK to set up your channel bank for FXS loop start and have * set 
> up as fxo_ks. That is how mine is set up and it works fine!

On some, that is the only option. I think zhone is one of them.

> On Friday, July 11, 2003 9:00 AM, firedude at shorelinuxsolutions.com 
> [SMTP:firedude at shorelinuxsolutions.com] wrote:
> > I have a premisys slimline 24 channel fxs channel bank.  I'm
> > attempting to
> > get it configured to work with my asterisk server.  I have 2 T100P
> > cards
> > in the asterisk box.  One is connected to an incoming pri, the second
> > is
> > connected to the channel bank.
> >
> > In my /etc/zaptel.conf file I have the line fxoks=25-48
> > In my zapata.conf file I have the line signaling=fxo_ks
> >
> > When talking to the company I bought the channel bank from, they wish
> > to
> > know what type of signaling the channel bank will get.  Apparently
> > their
> > only familiar with connectling the channel bank straight to the T1
> > line.
> > What type of signalling do I need to advise them that the channel 
> bank
> > is
> > receiving?  He advised me that they commonly see loopstart signaling.
> >
> > When I mentioned Koolstart to him, he was unfamiliar with it. I went
> > with
> > fxoks because that is what someone on the list recommended.  All
> > suggestions are appreciated.
> > AJ
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Steven Critchfield  <critch at basesys.com>