[Asterisk-Users] channel bank configuration

[Don Pobanz]

It is OK to set up your channel bank for FXS loop start and have * set 
up as fxo_ks. That is how mine is set up and it works fine!

Don Pobanz

On Friday, July 11, 2003 9:00 AM, firedude at shorelinuxsolutions.com 
[SMTP:firedude at shorelinuxsolutions.com] wrote:
> I have a premisys slimline 24 channel fxs channel bank.  I'm
> attempting to
> get it configured to work with my asterisk server.  I have 2 T100P
> cards
> in the asterisk box.  One is connected to an incoming pri, the second
> is
> connected to the channel bank.
>
> In my /etc/zaptel.conf file I have the line fxoks=25-48
> In my zapata.conf file I have the line signaling=fxo_ks
>
> When talking to the company I bought the channel bank from, they wish
> to
> know what type of signaling the channel bank will get.  Apparently
> their
> only familiar with connectling the channel bank straight to the T1
> line.
> What type of signalling do I need to advise them that the channel 
bank
> is
> receiving?  He advised me that they commonly see loopstart signaling.
>
> When I mentioned Koolstart to him, he was unfamiliar with it. I went
> with
> fxoks because that is what someone on the list recommended.  All
> suggestions are appreciated.
> AJ