[Asterisk-Users] ISDN PRI E1 configuration with E100P

[surajee at infotechs.lk]

yes, now i got the that problem solved, with 'immediate=yes', but now i've
faced with another,
When I connect the E1 to the cards, the LED lights does not change to green,
in E100P, its blinking red (even when there is no E1 plugged, its blinking
red)
and in E400P, its solid red. (this was the same even without
'immediate=yes')

When i start asterisk, the cards starts fine (as we see), givin the
following output,
*CLI>
  == D-Channel on span 1 up
    -- B-channel 1 successfully restarted on span 1
    -- B-channel 2 successfully restarted on span 1
       . . .
    -- B-channel 31 successfully restarted on span 1

after i put 'immediate=yes', i can even call from outside to the PRI E1, and
get connected to asterisk, and listen to the prompts played by asterisk

    -- Accepting call from '062279955' to 's' on channel 1, span 1
    -- Executing Wait("Zap/1-1", "2") in new stack
    -- Executing Answer("Zap/1-1", "") in new stack
    -- Executing DigitTimeout("Zap/1-1", "5") in new stack
    -- Set Digit Timeout to 5
    -- Executing ResponseTimeout("Zap/1-1", "10") in new stack
    -- Set Response Timeout to 10
    -- Executing BackGround("Zap/1-1", "demo-congrats") in new stack
    -- Playing 'demo-congrats'

But calling to outside from asterisk fails (with the following errors), we
don't know whether this related to the above problem

Executing Dial("SIP/802-8a26", "Zap/g2/0129063800|20|t") in new stack
NOTICE[262160]: File app_dial.c, Line 481 (dial_exec): Unable to create
channel of type 'Zap'
  == Everyone is busy at this time
    -- Executing Congestion("SIP/802-8a26", "") in new stack
  == Spawn extension (sip, 980129063800, 2) exited non-zero on
'SIP/802-8a26'

Following are new zaptel and zapata conf files,

zapata.conf

[channels]
transfer=yes
echocancel=yes
callprogress=yes
immediate=yes

;E100p card
switchtype=EuroISDN
signalling=pri_cpe
pridialplan=unknown
context=inbound-pstn
group=2
channel => 1-15,17-31

zaptel.conf


#E100p card
span=1,0,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16

defaultzone=us
loadzone=us


Thank you,

Surajee

----- Original Message -----

From: "Cristi" <cvasiliu at accessnet.ro>
To: <asterisk-users at lists.digium.com>
Sent: Friday, July 11, 2003 10:39 PM
Subject: Re: [Asterisk-Users] ISDN PRI E1 configuration with E100P


> surajee at infotechs.lk wrote:
>
> > hi Everyone,
> >
> > We are configuring an ISDN PRI E1 with an E100P card, when you load
> > the drivers, and starts the asterisk, cards also starts fine, givin
> > following output,
> >
> > *CLI>
> >   == D-Channel on span 1 up
> >     -- B-channel 1 successfully restarted on span 1
> >     -- B-channel 2 successfully restarted on span 1
> >        . . .
> >     -- B-channel 31 successfully restarted on span 1
> >
> > but, when we make a call to this E1 from outside, it gives the
> > following error,
> >
> > WARNING[213006]: File chan_zap.c, Line 5248 (pri_fixup): Call
> > specified, but not found?
> > WARNING[213006]: File chan_zap.c, Line 5786 (pri_dchannel): Hangup on
> > bad channel 1
> > WARNING[213006]: File chan_zap.c, Line 5248 (pri_fixup): Call
> > specified, but not found?
> > WARNING[213006]: File chan_zap.c, Line 5786 (pri_dchannel): Hangup on
> > bad channel 2
> >
> > does anybody hav an idea on this?
> >
> > our zaptel.conf is,
> >
> > #E100p card
> > span=1,0,0,ccs,hdb3,crc4
> > bchan=1-15,17-31
> > dchan=16
> >
> > zapata.conf,
> >
> > ;E100p card
> > switchtype=EuroISDN
> > signalling=pri_cpe
> > pridialplan=unknown
> > context=incoming
> > group = 2
> > channel => 1-15,17-31
> >
> > Thanks inadvance,
> >
> > Surajee
> >
> >
> > --------------This mail sent through OmniBIS.com--------------
> > _______________________________________________ Asterisk-Users mailing
> > list Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
>
> I was having the same problem because : 1 number for E1 and the local
> PTSN was not sending the DID to select the appropriate extension. Set
> the immediate=yes into zapata.conf and catch the call into s extension!
> Thanks to Martin Pycko ...
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>


--------------This mail sent through OmniBIS.com--------------