[Asterisk-Users] Cisco ATA-186 config guide for Asterisk

[John Todd]

No, I have not tested alternatives.  Perhaps Mark can interject a 
comment here on if he has REINVITEs working for devices behind 
different NATs or if that is on the agenda?  I haven't experimented 
widely on SIP/NAT interactions since it became stable in the CVS code.

JT


>John,
>
>Thanks for the detailed guide.
>
>As you mentioned, the situation where two ATAs behind NAT want to establish
>a direct connection is not resolved yet. In that case, the canreinvite would
>have to be set to no and some other solution outside of * would have to be
>used to traverse the NAT.  Have you tested any alternatives?
>
>Rgds
>Dan
>----- Original Message -----
>From: "John Todd" <jtodd at loligo.com>
>To: <asterisk-users at lists.digium.com>
>Sent: Sunday, June 29, 2003 7:35 PM
>Subject: [Asterisk-Users] Cisco ATA-186 config guide for Asterisk
>
>
>>
>>  I really should be doing something better on this beautiful weekend,
>>  but I'm trying to save myself some time for later projects by
>>  documenting some things that have been particularly troublesome in
>>  the past.  That being said...
>>
>>  I've written up a configuration guide for the Cisco ATA-186, which
>>  describes some of the features that are possible to set in the ATA
>>  and specifically what needs to be done to get it working with
>>  Asterisk.
>>
>>  It's not pretty, it's not HTML, but it's a lot of hints that I've
>>  collected from the list and other sources over the last year or so:
>>
>>  http://www.loligo.com/asterisk/Cisco/ATA-186-guide.v20030628.txt
>>
>>
>  > JT