[Asterisk-Users] Cisco ATA-186 config guide for Asterisk

[Mark Spencer]

No, it's not supported, nor can I imagine it will be.  If you're using
NAT, use IAX2 :)

Mark

On Tue, 1 Jul 2003, John Todd wrote:

> No, I have not tested alternatives.  Perhaps Mark can interject a
> comment here on if he has REINVITEs working for devices behind
> different NATs or if that is on the agenda?  I haven't experimented
> widely on SIP/NAT interactions since it became stable in the CVS code.
>
> JT
>
>
> >John,
> >
> >Thanks for the detailed guide.
> >
> >As you mentioned, the situation where two ATAs behind NAT want to establish
> >a direct connection is not resolved yet. In that case, the canreinvite would
> >have to be set to no and some other solution outside of * would have to be
> >used to traverse the NAT.  Have you tested any alternatives?
> >
> >Rgds
> >Dan
> >----- Original Message -----
> >From: "John Todd" <jtodd at loligo.com>
> >To: <asterisk-users at lists.digium.com>
> >Sent: Sunday, June 29, 2003 7:35 PM
> >Subject: [Asterisk-Users] Cisco ATA-186 config guide for Asterisk
> >
> >
> >>
> >>  I really should be doing something better on this beautiful weekend,
> >>  but I'm trying to save myself some time for later projects by
> >>  documenting some things that have been particularly troublesome in
> >>  the past.  That being said...
> >>
> >>  I've written up a configuration guide for the Cisco ATA-186, which
> >>  describes some of the features that are possible to set in the ATA
> >>  and specifically what needs to be done to get it working with
> >>  Asterisk.
> >>
> >>  It's not pretty, it's not HTML, but it's a lot of hints that I've
> >>  collected from the list and other sources over the last year or so:
> >>
> >>  http://www.loligo.com/asterisk/Cisco/ATA-186-guide.v20030628.txt
> >>
> >>
> >  > JT
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>