[Asterisk-Users] Cisco ATA-186 config guide for Asterisk

[Dan Fernandez]

John,

Thanks for the detailed guide.

As you mentioned, the situation where two ATAs behind NAT want to establish
a direct connection is not resolved yet. In that case, the canreinvite would
have to be set to no and some other solution outside of * would have to be
used to traverse the NAT.  Have you tested any alternatives?

Rgds
Dan
----- Original Message -----
From: "John Todd" <jtodd at loligo.com>
To: <asterisk-users at lists.digium.com>
Sent: Sunday, June 29, 2003 7:35 PM
Subject: [Asterisk-Users] Cisco ATA-186 config guide for Asterisk


>
> I really should be doing something better on this beautiful weekend,
> but I'm trying to save myself some time for later projects by
> documenting some things that have been particularly troublesome in
> the past.  That being said...
>
> I've written up a configuration guide for the Cisco ATA-186, which
> describes some of the features that are possible to set in the ATA
> and specifically what needs to be done to get it working with
> Asterisk.
>
> It's not pretty, it's not HTML, but it's a lot of hints that I've
> collected from the list and other sources over the last year or so:
>
> http://www.loligo.com/asterisk/Cisco/ATA-186-guide.v20030628.txt
>
>
> JT
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>